Case Study: Custom Embroidery Beads for a Mining Company in Japan
Source:Embroidery Beads /
Time:2026-09-18
Embroidery Beads for a Mining Company in Japan
A Mining Company approached us with a embroidery beads requirement for Japan. The brief was specific: a defined look, a hard launch date and a unit cost that had to survive shipping and duty. This case study records what was specified, what went wrong in sampling and how the bulk order was delivered.
The challenge
- Minimum order quantities far above what a growing brand can absorb
- No reliable way to track a order once it enters production
- Unclear responsibility when a defect shows up after washing
What we specified
| Product | Embroidery Beads |
|---|---|
| Client type | A Mining Company |
| Market | Japan |
| Order volume | 3,000 pieces across 2 colourways |
| Base fabric | Corduroy |
| Decoration | Flat Embroidery |
| Size range | XS-3XL |
| Sampling rounds | 4 |
| Delivery window | 8 weeks from PO to ex-factory |
How it was resolved
- We rebuilt the tech pack around Corduroy and locked shrinkage allowance before grading.
- Decoration was moved to Flat Embroidery after strike-off tests showed better wash durability.
- A pre-production sample was approved and retained as the golden reference.
- Production ran with in-line inspection and a mid-run photo report.
- Cartons were packed to the client's own barcode and size ratio specification.
Result
- 3,000 pieces delivered inside the 8-week window.
- Unit cost held within 2.0% of the original quotation.
- Return rate linked to fit or workmanship stayed under 0.5%.
- The specification is now on file, so reorders reproduce the approved sample.
What we would repeat
Lock the colour standard before grading. Once a shade moves, every downstream approval has to be redone and the calendar slips.
Planning something similar?
Share a reference photo or a sample garment and we will reverse-engineer the specification for your own label.
