Custom Part Body Mannequin in French Terry with Applique Embroidery for Promotional Campaigns

Custom Part Body Mannequin — French Terry with Applique Embroidery

We build part body mannequin programmes from a tech pack or a physical reference sample. This French Terry version is developed for brands that need a repeatable specification: the same cloth, the same hand feel and the same fit on every reorder. Fabric, trims, applique embroidery and packaging are all specifiable, so the garment stays consistent across seasons and across production runs.

Most buyers come to us after one of these problems: color drift between lab dips and bulk fabric, or packaging that arrives crushed and unsellable. Our response is to fix the specification first — fabric weight, shrinkage allowance, stitch density and tolerance — before a single bulk metre is cut.

Specification

What you can customise

• Tie-Dye Wash — available on French Terry, quoted per position and per colour.
• Woven Label — available on French Terry, quoted per position and per colour.
• Puff Printing — available on French Terry, quoted per position and per colour.
• Garment Dyeing — available on French Terry, quoted per position and per colour.
• All-Over Sublimation — available on French Terry, quoted per position and per colour.
• Smocking — available on French Terry, quoted per position and per colour.
• Laser Engraving — available on French Terry, quoted per position and per colour.

How we produce it

1. Tech pack review and fabric confirmation
2. Lab dips or print strike-off for approval
3. Pattern making, grading and a French Terry-spec prototype
4. Fit sample and wearer test, then a pre-production sample
5. Bulk cutting with applique embroidery applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing

Typical applications

• Outdoor and Hiking — part body mannequin uniforms, staff wear or resale programmes
• Yoga and Pilates Studios — part body mannequin uniforms, staff wear or resale programmes
• Bars and Nightclubs — part body mannequin uniforms, staff wear or resale programmes
• Ski and Snowboard Resorts — part body mannequin uniforms, staff wear or resale programmes
• Kidswear Subscription Boxes — part body mannequin uniforms, staff wear or resale programmes

Quality control

Every bulk order is checked against the approved sample for shade, hand feel, measurements and workmanship. We record shrinkage, colour fastness and seam strength on the first bulk lot and hold the data as the reference for reorders, so part body mannequin batches stay comparable over time. Inspection photos and the measurement report are sent before the balance payment is due.

FAQ

Can you match a specific colour?

Yes. Send us a Pantone TCX reference or a physical swatch. We return lab dips for approval and hold bulk shade within the agreed tolerance band before cutting.

What is the minimum order quantity?

Standard programmes start at 500 pieces per style and colour. We can split sizes across a size set, and for first orders we often accept a mixed-colour run to help you test the market.

How long does sampling take?

A first prototype is typically ready in 7 working days after the tech pack is confirmed, including fabric sourcing if the base cloth is not in our stock library. Revisions add about 4 days each.

What file formats do you need for artwork?

Vector files (AI, EPS, PDF) give the best print and embroidery results. For raster artwork please supply at least 300 dpi at the final print size. We digitise embroidery files in-house and return a sew-out photo for approval.

Start your part body mannequin programme

Share a reference photo or a sample garment and we will reverse-engineer the specification for your own label.