Custom Ribbon in Polypropylene (PP) with Offset Printing for Outerwear and Jacket Programmes

Custom Ribbon — Polypropylene (PP) with Offset Printing

We supply ribbon to garment factories and brands, built in Polypropylene (PP) with offset printing for bridal and eveningwear studios. On a trim like this the specification that decides the outcome is colour fastness to washing and light, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 3000 pieces per style per finish.

The failures here are predictable: minimum order quantities far above what a growing brand can absorb, or shade variation within one carton. We lock material, finish, dimension and tolerance before bulk, and prepare GSO conformity with Arabic labelling so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• Fringe Finish — available on Polypropylene (PP), quoted per position and per colour.
• Hot Foil Stamping — available on Polypropylene (PP), quoted per position and per colour.
• Stamping — available on Polypropylene (PP), quoted per position and per colour.
• Laser Engraving — available on Polypropylene (PP), quoted per position and per colour.
• Beaded Detail — available on Polypropylene (PP), quoted per position and per colour.
• Woven Jacquard — available on Polypropylene (PP), quoted per position and per colour.
• Digital Printing — available on Polypropylene (PP), quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed width
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with offset printing applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for REACH nickel-release test for metal findings are prepared for the destination market. We ship to Jebel Ali with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same colour fastness to washing and light.

FAQ

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

Start your ribbon programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.