Custom Hang Tag in Polypropylene (PP) with Ultrasonic Welding for Denim and Workwear Programmes

Custom Hang Tag — Polypropylene (PP) with Ultrasonic Welding

We supply hang tag to garment factories and brands, built in Polypropylene (PP) with ultrasonic welding for e-commerce and small-batch brands. On a trim like this the specification that decides the outcome is string and fastener strength, because a torn tag means no barcode, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 2000 pieces per style per finish.

The failures here are predictable: minimum order quantities far above what a growing brand can absorb, or inconsistent sizing between production runs. We lock material, finish, dimension and tolerance before bulk, and prepare UKCA and REACH documentation so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• Offset Printing — available on Polypropylene (PP), quoted per position and per colour.
• Beaded Detail — available on Polypropylene (PP), quoted per position and per colour.
• Rubber Coating — available on Polypropylene (PP), quoted per position and per colour.
• Sewn Edge — available on Polypropylene (PP), quoted per position and per colour.
• Injection Moulding — available on Polypropylene (PP), quoted per position and per colour.
• Overlocked Edge — available on Polypropylene (PP), quoted per position and per colour.
• Sequin Stitching — available on Polypropylene (PP), quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed size
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with ultrasonic welding applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for REACH nickel-release test for metal findings are prepared for the destination market. We ship to Felixstowe with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same string and fastener strength.

FAQ

How long does sampling take?

A first sample takes 12 working days, and each revision about 5 days.

What is the minimum order?

Programmes start at 2000 pieces per style per finish. Mixed sizes are fine within one style.

Which compliance documents do you provide?

We prepare REACH nickel-release test for metal findings and the supporting test reports for the destination market.

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

Start your hang tag programme

If you already have a supplier, send us the last problem you had with them. That is usually where we start.