Custom Button in Polypropylene (PP) with Rose Gold Plating for Outerwear and Jacket Programmes

Custom Button — Polypropylene (PP) with Rose Gold Plating

We supply button to garment factories and brands, built in Polypropylene (PP) with rose gold plating for childrenswear and schoolwear. On a trim like this the specification that decides the outcome is shade match across a full box, since buttons are bought by the gross, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 500 pieces per style per finish.

The failures here are predictable: a finish that tarnishes or rubs off after washing, or minimum order quantities far above what a growing brand can absorb. We lock material, finish, dimension and tolerance before bulk, and prepare SNI or SIRIM documentation per destination so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• Hot Foil Stamping — available on Polypropylene (PP), quoted per position and per colour.
• Antique Brass Plating — available on Polypropylene (PP), quoted per position and per colour.
• Mirror Polish — available on Polypropylene (PP), quoted per position and per colour.
• Overlocked Edge — available on Polypropylene (PP), quoted per position and per colour.
• Dye-Sublimation Printing — available on Polypropylene (PP), quoted per position and per colour.
• Digital Printing — available on Polypropylene (PP), quoted per position and per colour.
• Gold Plating — available on Polypropylene (PP), quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed ligne
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with rose gold plating applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for OEKO-TEX Standard 100 for dyes and trims are prepared for the destination market. We ship to Jakarta or Port Klang with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same shade match across a full box.

FAQ

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

Which compliance documents do you provide?

We prepare OEKO-TEX Standard 100 for dyes and trims and the supporting test reports for the destination market.

How long does sampling take?

A first sample takes 12 working days, and each revision about 4 days.

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

Start your button programme

Tell us the quantity, the target price and the delivery window — we will tell you what is realistic before you commit.