Custom Button in Polypropylene (PP) with UV Printing for E-commerce and Small-Batch Brands

Custom Button — Polypropylene (PP) with UV Printing

We supply button to garment factories and brands, built in Polypropylene (PP) with uv printing for e-commerce and small-batch brands. On a trim like this the specification that decides the outcome is hole burr, because a rough burr cuts thread on the line, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 5000 pieces per style per finish.

The failures here are predictable: unclear responsibility when a defect shows up after washing, or a finish that tarnishes or rubs off after washing. We lock material, finish, dimension and tolerance before bulk, and prepare CPSIA and California Prop 65 compliance so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• Black Oxide — available on Polypropylene (PP), quoted per position and per colour.
• Screen Printing — available on Polypropylene (PP), quoted per position and per colour.
• Heat Transfer Printing — available on Polypropylene (PP), quoted per position and per colour.
• Chrome Plating — available on Polypropylene (PP), quoted per position and per colour.
• Rhinestone Setting — available on Polypropylene (PP), quoted per position and per colour.
• Anti-Rust Treatment — available on Polypropylene (PP), quoted per position and per colour.
• UV Printing — available on Polypropylene (PP), quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed ligne
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with uv printing applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for colour fastness to washing, rubbing and light are prepared for the destination market. We ship to Los Angeles or New York with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same hole burr.

FAQ

What is the minimum order?

Programmes start at 5000 pieces per style per finish. Mixed sizes are fine within one style.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

Start your button programme

Tell us the quantity, the target price and the delivery window — we will tell you what is realistic before you commit.