Custom Button in Polyester with Heat Transfer Printing for Uniform and Corporate Programmes

Custom Button — Polyester with Heat Transfer Printing

We supply button to garment factories and brands, built in Polyester with heat transfer printing for denim and workwear programmes. On a trim like this the specification that decides the outcome is shade match across a full box, since buttons are bought by the gross, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 2000 pieces per style per finish.

The failures here are predictable: a finish that tarnishes or rubs off after washing, or a supplier who disappears once the deposit is paid. We lock material, finish, dimension and tolerance before bulk, and prepare GSO conformity with Arabic labelling so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• Die-Casting — available on Polyester, quoted per position and per colour.
• Injection Moulding — available on Polyester, quoted per position and per colour.
• Tassel Finish — available on Polyester, quoted per position and per colour.
• Brushed Finish — available on Polyester, quoted per position and per colour.
• Hot Foil Stamping — available on Polyester, quoted per position and per colour.
• Rhinestone Setting — available on Polyester, quoted per position and per colour.
• Soft Enamel Fill — available on Polyester, quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed ligne
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with heat transfer printing applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for REACH nickel-release test for metal findings are prepared for the destination market. We ship to Jebel Ali with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same shade match across a full box.

FAQ

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

How long does sampling take?

A first sample takes 14 working days, and each revision about 3 days.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

Start your button programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.