Custom Shoulder Pad in Polypropylene (PP) with Yarn Dyeing for Childrenswear and Schoolwear

Custom Shoulder Pad — Polypropylene (PP) with Yarn Dyeing

We supply shoulder pad to garment factories and brands, built in Polypropylene (PP) with yarn dyeing for uniform and corporate programmes. On a trim like this the specification that decides the outcome is cover fabric friction, so it does not slip inside the shoulder, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 500 pieces per style per finish.

The failures here are predictable: inconsistent sizing between production runs, or minimum order quantities far above what a growing brand can absorb. We lock material, finish, dimension and tolerance before bulk, and prepare SNI or SIRIM documentation per destination so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• Heat-Cut Edge — available on Polypropylene (PP), quoted per position and per colour.
• Die-Casting — available on Polypropylene (PP), quoted per position and per colour.
• Knitted Structure — available on Polypropylene (PP), quoted per position and per colour.
• Powder Coating — available on Polypropylene (PP), quoted per position and per colour.
• Woven Jacquard — available on Polypropylene (PP), quoted per position and per colour.
• Embroidery — available on Polypropylene (PP), quoted per position and per colour.
• Epoxy Dome — available on Polypropylene (PP), quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed thickness
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with yarn dyeing applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for colour fastness to washing, rubbing and light are prepared for the destination market. We ship to Jakarta or Port Klang with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same cover fabric friction.

FAQ

How long does sampling take?

A first sample takes 12 working days, and each revision about 4 days.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

Do you ship to our forwarder?

Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.

Start your shoulder pad programme

Tell us the quantity, the target price and the delivery window — we will tell you what is realistic before you commit.