Custom Cord Stopper — Polyethylene (PE) with Gunmetal Plating
We supply cord stopper to garment factories and brands, built in Polyethylene (PE) with gunmetal plating for bridal and eveningwear studios. On a trim like this the specification that decides the outcome is grip force on the actual cord, tested both dry and wet, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 500 pieces per style per finish.
The failures here are predictable: minimum order quantities far above what a growing brand can absorb, or unclear responsibility when a defect shows up after washing. We lock material, finish, dimension and tolerance before bulk, and prepare SNI or SIRIM documentation per destination so the shipment clears instead of sitting at port while your selling season passes.
Specification
| Product | Cord Stopper |
|---|---|
| Bore | 3 mm |
| Type | cord end |
| Base material | Polyethylene (PE) |
| Finish / process | Gunmetal Plating |
| Colour options | 16 Pantone-matched shades |
| Packing | reel packed |
| MOQ | 500 pieces per style per finish |
| Sampling | 7 working days, 5 days per revision |
| Bulk lead time | 15-30 days after approval |
| Compliance | SNI or SIRIM documentation per destination; salt spray test for metal finishes |
| Ship to | Jakarta or Port Klang (Asia-Pacific) |
What buyers can customise
- Powder Coating — available on Polyethylene (PE), quoted per position and per colour.
- Hard Enamel Fill — available on Polyethylene (PE), quoted per position and per colour.
- Anti-Rust Treatment — available on Polyethylene (PE), quoted per position and per colour.
- Mirror Polish — available on Polyethylene (PE), quoted per position and per colour.
- Laser Engraving — available on Polyethylene (PE), quoted per position and per colour.
- Rubber Coating — available on Polyethylene (PE), quoted per position and per colour.
- Overlocked Edge — available on Polyethylene (PE), quoted per position and per colour.
How we produce it
- Drawing or reference sample review, with size and finish confirmed
- Material selection and a finish sample or strike-off
- Prototype made to the agreed bore
- Fit and wash test on the actual garment fabric, then a pre-production sample
- Bulk run with gunmetal plating applied under controlled settings
- In-line inspection, final AQL 2.5 inspection and packing to your ratio
Where it is used
- Denim and workwear — hard-wearing finishes that survive industrial washing
- Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
- Childrenswear and schoolwear — tested to the destination's safety standard
- Bridal and eveningwear — small runs with hand-finished detail
- Uniform and corporate programmes — repeatable spec held on file for reorders
Packing, testing and delivery
Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for salt spray test for metal finishes are prepared for the destination market. We ship to Jakarta or Port Klang with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same grip force on the actual cord.
FAQ
How do you control colour on reorders?
The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.
What is the minimum order?
Programmes start at 500 pieces per style per finish. Mixed sizes are fine within one style.
What packing options are available?
Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
Start your cord stopper programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
