Custom Cord Stopper in Elastic Rubber with Screen Printing for Childrenswear and Schoolwear

Custom Cord Stopper — Elastic Rubber with Screen Printing

We supply cord stopper to garment factories and brands, built in Elastic Rubber with screen printing for outerwear and jacket programmes. On a trim like this the specification that decides the outcome is spring life across repeated release cycles, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 5000 pieces per style per finish.

The failures here are predictable: a finish that tarnishes or rubs off after washing, or shade variation within one carton. We lock material, finish, dimension and tolerance before bulk, and prepare GSO conformity with Arabic labelling so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• Rose Gold Plating — available on Elastic Rubber, quoted per position and per colour.
• Paint Spray — available on Elastic Rubber, quoted per position and per colour.
• Hot Foil Stamping — available on Elastic Rubber, quoted per position and per colour.
• Brushed Finish — available on Elastic Rubber, quoted per position and per colour.
• Antique Brass Plating — available on Elastic Rubber, quoted per position and per colour.
• Sewn Edge — available on Elastic Rubber, quoted per position and per colour.
• Antique Silver — available on Elastic Rubber, quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed bore
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with screen printing applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for colour fastness to washing, rubbing and light are prepared for the destination market. We ship to Jebel Ali with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same spring life across repeated release cycles.

FAQ

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

Which compliance documents do you provide?

We prepare colour fastness to washing, rubbing and light and the supporting test reports for the destination market.

How long does sampling take?

A first sample takes 12 working days, and each revision about 4 days.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

Start your cord stopper programme

If you already have a supplier, send us the last problem you had with them. That is usually where we start.