Custom Tag Pin in Nylon (PA) with Dye-Sublimation Printing for Childrenswear and Schoolwear

Custom Tag Pin — Nylon (PA) with Dye-Sublimation Printing

We supply tag pin to garment factories and brands, built in Nylon (PA) with dye-sublimation printing for bridal and eveningwear studios. On a trim like this the specification that decides the outcome is head strength, because a snapped head leaves the pin in the garment, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 500 pieces per style per finish.

The failures here are predictable: shade variation within one carton, or packing that arrives mixed and unusable on the line. We lock material, finish, dimension and tolerance before bulk, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• Stamping — available on Nylon (PA), quoted per position and per colour.
• Dye-Sublimation Printing — available on Nylon (PA), quoted per position and per colour.
• Digital Printing — available on Nylon (PA), quoted per position and per colour.
• Powder Coating — available on Nylon (PA), quoted per position and per colour.
• Anti-Rust Treatment — available on Nylon (PA), quoted per position and per colour.
• Overlocked Edge — available on Nylon (PA), quoted per position and per colour.
• Laser Engraving — available on Nylon (PA), quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed length
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with dye-sublimation printing applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for EN 71 part 3 for decorative components are prepared for the destination market. We ship to Shanghai or Shenzhen with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same head strength.

FAQ

What is the minimum order?

Programmes start at 500 pieces per style per finish. Mixed sizes are fine within one style.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

Start your tag pin programme

Tell us the quantity, the target price and the delivery window — we will tell you what is realistic before you commit.