Custom Tag Pin in Nickel-Free Alloy with Embossing for Childrenswear and Schoolwear

Custom Tag Pin — Nickel-Free Alloy with Embossing

We supply tag pin to garment factories and brands, built in Nickel-Free Alloy with embossing for outerwear and jacket programmes. On a trim like this the specification that decides the outcome is needle compatibility with the tagging gun on your line, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 3000 pieces per style per finish.

The failures here are predictable: inconsistent sizing between production runs, or a supplier who disappears once the deposit is paid. We lock material, finish, dimension and tolerance before bulk, and prepare REACH and GPSR documentation so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• Stamping — available on Nickel-Free Alloy, quoted per position and per colour.
• Hard Enamel Fill — available on Nickel-Free Alloy, quoted per position and per colour.
• Dye-Sublimation Printing — available on Nickel-Free Alloy, quoted per position and per colour.
• Soft Enamel Fill — available on Nickel-Free Alloy, quoted per position and per colour.
• Epoxy Dome — available on Nickel-Free Alloy, quoted per position and per colour.
• Injection Moulding — available on Nickel-Free Alloy, quoted per position and per colour.
• Rubber Coating — available on Nickel-Free Alloy, quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed length
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with embossing applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for EN 71 part 3 for decorative components are prepared for the destination market. We ship to Rotterdam or Felixstowe with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same needle compatibility with the tagging gun on your line.

FAQ

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

What is the minimum order?

Programmes start at 3000 pieces per style per finish. Mixed sizes are fine within one style.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

Start your tag pin programme

Tell us the quantity, the target price and the delivery window — we will tell you what is realistic before you commit.