Custom Mannequin in Genuine Leather with Hot Foil Stamping for Uniform and Corporate Programmes

Custom Mannequin — Genuine Leather with Hot Foil Stamping

We supply mannequin to garment factories and brands, built in Genuine Leather with hot foil stamping for uniform and corporate programmes. On a trim like this the specification that decides the outcome is measurement accuracy against the size chart you sell, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 3000 pieces per style per finish.

The failures here are predictable: unclear responsibility when a defect shows up after washing, or packing that arrives mixed and unusable on the line. We lock material, finish, dimension and tolerance before bulk, and prepare REACH and GPSR documentation so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• Offset Printing — available on Genuine Leather, quoted per position and per colour.
• Hot Foil Stamping — available on Genuine Leather, quoted per position and per colour.
• Debossing — available on Genuine Leather, quoted per position and per colour.
• Powder Coating — available on Genuine Leather, quoted per position and per colour.
• Overlocked Edge — available on Genuine Leather, quoted per position and per colour.
• Yarn Dyeing — available on Genuine Leather, quoted per position and per colour.
• Braided Weave — available on Genuine Leather, quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed height
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with hot foil stamping applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for GRS recycled content claim are prepared for the destination market. We ship to Rotterdam or Felixstowe with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same measurement accuracy against the size chart you sell.

FAQ

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

What is the minimum order?

Programmes start at 3000 pieces per style per finish. Mixed sizes are fine within one style.

How long does sampling take?

A first sample takes 10 working days, and each revision about 5 days.

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

Start your mannequin programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.