Custom Apparel Clip — Brass with Heat Transfer Printing
We supply apparel clip to garment factories and brands, built in Brass with heat transfer printing for uniform and corporate programmes. On a trim like this the specification that decides the outcome is jaw grip, measured as pull-off force on the actual fabric, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 3000 pieces per style per finish.
The failures here are predictable: a supplier who disappears once the deposit is paid, or packing that arrives mixed and unusable on the line. We lock material, finish, dimension and tolerance before bulk, and prepare REACH and GPSR documentation so the shipment clears instead of sitting at port while your selling season passes.
Specification
| Product | Apparel Clip |
|---|---|
| Size | 32 mm |
| Type | suspender clip |
| Base material | Brass |
| Finish / process | Heat Transfer Printing |
| Colour options | 24 Pantone-matched shades |
| Packing | bulk packed |
| MOQ | 3000 pieces per style per finish |
| Sampling | 7 working days, 4 days per revision |
| Bulk lead time | 15-30 days after approval |
| Compliance | REACH and GPSR documentation; azo dye-free declaration |
| Ship to | Rotterdam or Felixstowe (Europe) |
What buyers can customise
- Powder Coating — available on Brass, quoted per position and per colour.
- Embossing — available on Brass, quoted per position and per colour.
- Hot Foil Stamping — available on Brass, quoted per position and per colour.
- Soft Enamel Fill — available on Brass, quoted per position and per colour.
- Rubber Coating — available on Brass, quoted per position and per colour.
- Anti-Rust Treatment — available on Brass, quoted per position and per colour.
- Laser Engraving — available on Brass, quoted per position and per colour.
How we produce it
- Drawing or reference sample review, with size and finish confirmed
- Material selection and a finish sample or strike-off
- Prototype made to the agreed size
- Fit and wash test on the actual garment fabric, then a pre-production sample
- Bulk run with heat transfer printing applied under controlled settings
- In-line inspection, final AQL 2.5 inspection and packing to your ratio
Where it is used
- Denim and workwear — hard-wearing finishes that survive industrial washing
- Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
- Childrenswear and schoolwear — tested to the destination's safety standard
- Bridal and eveningwear — small runs with hand-finished detail
- Uniform and corporate programmes — repeatable spec held on file for reorders
Packing, testing and delivery
Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for azo dye-free declaration are prepared for the destination market. We ship to Rotterdam or Felixstowe with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same jaw grip.
FAQ
How long does sampling take?
A first sample takes 7 working days, and each revision about 4 days.
Which compliance documents do you provide?
We prepare azo dye-free declaration and the supporting test reports for the destination market.
What packing options are available?
Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.
Do you ship to our forwarder?
Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.
Start your apparel clip programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
