Custom Balaclava — Mesh with Stamping
We supply balaclava to brands, retailers, uniform and promotional programmes, made in Mesh with stamping for denim and workwear programmes. On headwear the specification that decides whether it sells or comes back is fit around the crown, because a mask that rides up is taken off — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 1000 pieces per style.
The failures here are predictable: inconsistent sizing between production runs, or shade variation within one carton. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the container clears instead of missing the season it was bought for.
Specification
| Product | Balaclava |
|---|---|
| Coverage | open face |
| Type | thermal balaclava |
| Material | Mesh |
| Construction / finish | Stamping |
| Colour options | 12 shades, Pantone matched |
| Packing | single polybag |
| MOQ | 1000 pieces per style |
| Sampling | 7 working days, 5 days per revision |
| Bulk lead time | 20-40 days after approval |
| Compliance | GB 18401 safety classification with GB/T 29862 fibre labelling; azo dye-free declaration |
| Ship to | Shanghai or Shenzhen (Mainland China) |
What buyers can customise
- Piece Dyeing — available on Mesh, quoted per position and per colour.
- Embroidery — available on Mesh, quoted per position and per colour.
- Rubber Coating — available on Mesh, quoted per position and per colour.
- Tassel Finish — available on Mesh, quoted per position and per colour.
- Rib Knit — available on Mesh, quoted per position and per colour.
- Hand Crochet — available on Mesh, quoted per position and per colour.
- Heat-Cut Edge — available on Mesh, quoted per position and per colour.
How we produce it
- Specification review — shape, measurement, material and target price
- Material sourcing and a finished sample in the agreed Mesh
- Shape sample with stamping applied, blocked or knitted to the approved profile
- Wear and wash test on the production material, then pre-production sample
- Bulk production with in-line checks on shape, stitching and trim alignment
- Final AQL 2.5 inspection and packing that protects the shape in transit
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and event channels — logo application and retail packing
- Outdoor and winter programmes — built for the climate it is sold in
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for azo dye-free declaration are prepared for the destination market. We ship to Shanghai or Shenzhen with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same fit around the crown.
FAQ
How do you control colour on reorders?
The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
How long does sampling take?
A first sample takes 7 working days, and each revision about 5 days.
What is the minimum order?
Programmes start at 1000 pieces per style per finish. Mixed sizes are fine within one style.
Start your balaclava programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
