Custom Festive & Party Hat in PE Brim Insert with Rubber Coating for Uniform and Corporate Programmes

Custom Festive & Party Hat — PE Brim Insert with Rubber Coating

We supply festive & party hat to brands, retailers, uniform and promotional programmes, made in PE Brim Insert with rubber coating for outerwear and jacket programmes. On headwear the specification that decides whether it sells or comes back is glued and stitched components that do not fall off in the bag — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 500 pieces per style.

The failures here are predictable: packing that arrives mixed and unusable on the line, or colour drift between the approved sample and the bulk trim. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare UKCA and REACH documentation so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Die-Casting — available on PE Brim Insert, quoted per position and per colour.
• Distressed Wash — available on PE Brim Insert, quoted per position and per colour.
• Flat Embroidery — available on PE Brim Insert, quoted per position and per colour.
• Epoxy Dome — available on PE Brim Insert, quoted per position and per colour.
• Rhinestone Setting — available on PE Brim Insert, quoted per position and per colour.
• Shapeable Edge — available on PE Brim Insert, quoted per position and per colour.
• Reflective Piping — available on PE Brim Insert, quoted per position and per colour.

How we produce it

1. Specification review — shape, measurement, material and target price
2. Material sourcing and a finished sample in the agreed PE Brim Insert
3. Shape sample with rubber coating applied, blocked or knitted to the approved profile
4. Wear and wash test on the production material, then pre-production sample
5. Bulk production with in-line checks on shape, stitching and trim alignment
6. Final AQL 2.5 inspection and packing that protects the shape in transit

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and event channels — logo application and retail packing
• Outdoor and winter programmes — built for the climate it is sold in

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for CPSIA lead and phthalate testing are prepared for the destination market. We ship to Felixstowe with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same glued and stitched components that do not fall off in the bag.

FAQ

Do you ship to our forwarder?

Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.

Which compliance documents do you provide?

We prepare CPSIA lead and phthalate testing and the supporting test reports for the destination market.

How long does sampling take?

A first sample takes 14 working days, and each revision about 5 days.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

Start your festive & party hat programme

If you already have a supplier, send us the last problem you had with them. That is usually where we start.