Custom Cowboy Hat in Wheat Straw Braid with Anti-Rust Treatment for Bridal and Eveningwear Studios

Custom Cowboy Hat — Wheat Straw Braid with Anti-Rust Treatment

We supply cowboy hat to brands, retailers, uniform and promotional programmes, made in Wheat Straw Braid with anti-rust treatment for bridal and eveningwear studios. On headwear the specification that decides whether it sells or comes back is brim roll, which has to hold and still be shapeable — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 2000 pieces per style.

The failures here are predictable: packing that arrives mixed and unusable on the line, or a finish that tarnishes or rubs off after washing. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Metal Buckle Strap — available on Wheat Straw Braid, quoted per position and per colour.
• Unstructured Crown — available on Wheat Straw Braid, quoted per position and per colour.
• Water-Repellent Finish — available on Wheat Straw Braid, quoted per position and per colour.
• Injection Moulding — available on Wheat Straw Braid, quoted per position and per colour.
• Pigment Dye — available on Wheat Straw Braid, quoted per position and per colour.
• Steam Blocking — available on Wheat Straw Braid, quoted per position and per colour.
• Embroidery — available on Wheat Straw Braid, quoted per position and per colour.

How we produce it

1. Specification review — shape, measurement, material and target price
2. Material sourcing and a finished sample in the agreed Wheat Straw Braid
3. Shape sample with anti-rust treatment applied, blocked or knitted to the approved profile
4. Wear and wash test on the production material, then pre-production sample
5. Bulk production with in-line checks on shape, stitching and trim alignment
6. Final AQL 2.5 inspection and packing that protects the shape in transit

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and event channels — logo application and retail packing
• Outdoor and winter programmes — built for the climate it is sold in

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for salt spray test for metal finishes are prepared for the destination market. We ship to Shanghai or Shenzhen with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same brim roll.

FAQ

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

Which compliance documents do you provide?

We prepare salt spray test for metal finishes and the supporting test reports for the destination market.

How long does sampling take?

A first sample takes 12 working days, and each revision about 5 days.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

Start your cowboy hat programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.