Custom Festive & Party Hat in EVA Foam with Embroidered Patch for Uniform and Corporate Programmes

Custom Festive & Party Hat — EVA Foam with Embroidered Patch

We supply festive & party hat to brands, retailers, uniform and promotional programmes, made in EVA Foam with embroidered patch for e-commerce and small-batch brands. On headwear the specification that decides whether it sells or comes back is glued and stitched components that do not fall off in the bag — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 2000 pieces per style.

The failures here are predictable: unclear responsibility when a defect shows up after washing, or packing that arrives mixed and unusable on the line. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare SNI or SIRIM documentation per destination so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Rope Trim — available on EVA Foam, quoted per position and per colour.
• Hot Foil Stamping — available on EVA Foam, quoted per position and per colour.
• Fringe Finish — available on EVA Foam, quoted per position and per colour.
• Water-Repellent Finish — available on EVA Foam, quoted per position and per colour.
• Enzyme Wash — available on EVA Foam, quoted per position and per colour.
• Die-Casting — available on EVA Foam, quoted per position and per colour.
• Reflective Piping — available on EVA Foam, quoted per position and per colour.

How we produce it

1. Specification review — shape, measurement, material and target price
2. Material sourcing and a finished sample in the agreed EVA Foam
3. Shape sample with embroidered patch applied, blocked or knitted to the approved profile
4. Wear and wash test on the production material, then pre-production sample
5. Bulk production with in-line checks on shape, stitching and trim alignment
6. Final AQL 2.5 inspection and packing that protects the shape in transit

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and event channels — logo application and retail packing
• Outdoor and winter programmes — built for the climate it is sold in

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for GRS recycled content claim are prepared for the destination market. We ship to Jakarta or Port Klang with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same glued and stitched components that do not fall off in the bag.

FAQ

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

Which compliance documents do you provide?

We prepare GRS recycled content claim and the supporting test reports for the destination market.

How long does sampling take?

A first sample takes 10 working days, and each revision about 5 days.

Start your festive & party hat programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.