Custom Festive & Party Hat in Sequin Fabric with Injection Moulding for Denim and Workwear Programmes

Custom Festive & Party Hat — Sequin Fabric with Injection Moulding

We supply festive & party hat to brands, retailers, uniform and promotional programmes, made in Sequin Fabric with injection moulding for uniform and corporate programmes. On headwear the specification that decides whether it sells or comes back is glued and stitched components that do not fall off in the bag — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 2000 pieces per style.

The failures here are predictable: a supplier who disappears once the deposit is paid, or minimum order quantities far above what a growing brand can absorb. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Hot Foil Stamping — available on Sequin Fabric, quoted per position and per colour.
• Beaded Detail — available on Sequin Fabric, quoted per position and per colour.
• Paint Spray — available on Sequin Fabric, quoted per position and per colour.
• Ultrasonic Welding — available on Sequin Fabric, quoted per position and per colour.
• Leather Patch — available on Sequin Fabric, quoted per position and per colour.
• Hard Enamel Fill — available on Sequin Fabric, quoted per position and per colour.
• Overlocked Edge — available on Sequin Fabric, quoted per position and per colour.

How we produce it

1. Specification review — shape, measurement, material and target price
2. Material sourcing and a finished sample in the agreed Sequin Fabric
3. Shape sample with injection moulding applied, blocked or knitted to the approved profile
4. Wear and wash test on the production material, then pre-production sample
5. Bulk production with in-line checks on shape, stitching and trim alignment
6. Final AQL 2.5 inspection and packing that protects the shape in transit

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and event channels — logo application and retail packing
• Outdoor and winter programmes — built for the climate it is sold in

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for REACH nickel-release test for metal findings are prepared for the destination market. We ship to Shanghai or Shenzhen with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same glued and stitched components that do not fall off in the bag.

FAQ

What is the minimum order?

Programmes start at 2000 pieces per style per finish. Mixed sizes are fine within one style.

Do you ship to our forwarder?

Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

How long does sampling take?

A first sample takes 10 working days, and each revision about 3 days.

Start your festive & party hat programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.