Custom Festive & Party Hat in Organza with Steam Blocking for Outerwear and Jacket Programmes

Custom Festive & Party Hat — Organza with Steam Blocking

We supply festive & party hat to brands, retailers, uniform and promotional programmes, made in Organza with steam blocking for outerwear and jacket programmes. On headwear the specification that decides whether it sells or comes back is component safety — decorative parts tested to the destination's toy or general product standard — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 300 pieces per style.

The failures here are predictable: colour drift between the approved sample and the bulk trim, or a finish that tarnishes or rubs off after washing. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GSO conformity with Arabic labelling so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Reflective Piping — available on Organza, quoted per position and per colour.
• Quilted Lining — available on Organza, quoted per position and per colour.
• Ultrasonic Welding — available on Organza, quoted per position and per colour.
• Hot Foil Stamping — available on Organza, quoted per position and per colour.
• Anti-UV Finish — available on Organza, quoted per position and per colour.
• Heat Transfer Printing — available on Organza, quoted per position and per colour.
• Moisture-Wicking Finish — available on Organza, quoted per position and per colour.

How we produce it

1. Specification review — shape, measurement, material and target price
2. Material sourcing and a finished sample in the agreed Organza
3. Shape sample with steam blocking applied, blocked or knitted to the approved profile
4. Wear and wash test on the production material, then pre-production sample
5. Bulk production with in-line checks on shape, stitching and trim alignment
6. Final AQL 2.5 inspection and packing that protects the shape in transit

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and event channels — logo application and retail packing
• Outdoor and winter programmes — built for the climate it is sold in

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for EN 71 part 3 for decorative components are prepared for the destination market. We ship to Jebel Ali with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same component safety — decorative parts tested to the destination's toy or general product standard.

FAQ

How long does sampling take?

A first sample takes 12 working days, and each revision about 3 days.

What is the minimum order?

Programmes start at 300 pieces per style per finish. Mixed sizes are fine within one style.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

Start your festive & party hat programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.