Custom Hat, Scarf & Glove Set in Polar Fleece with Packable Crushable Finish for Outerwear and Jacket Programmes

Custom Hat, Scarf & Glove Set — Polar Fleece with Packable Crushable Finish

We supply hat, scarf & glove set to brands, retailers, uniform and promotional programmes, made in Polar Fleece with packable crushable finish for denim and workwear programmes. On headwear the specification that decides whether it sells or comes back is pairing and packing, so sets arrive complete and correctly sized — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 300 pieces per style.

The failures here are predictable: a finish that tarnishes or rubs off after washing, or inconsistent sizing between production runs. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare UKCA and REACH documentation so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Snapback Closure — available on Polar Fleece, quoted per position and per colour.
• Rib Knit — available on Polar Fleece, quoted per position and per colour.
• Braided Weave — available on Polar Fleece, quoted per position and per colour.
• Fleece Lining — available on Polar Fleece, quoted per position and per colour.
• Cable Knit — available on Polar Fleece, quoted per position and per colour.
• 3D Puff Embroidery — available on Polar Fleece, quoted per position and per colour.
• Hand Braiding — available on Polar Fleece, quoted per position and per colour.

How we produce it

1. Specification review — shape, measurement, material and target price
2. Material sourcing and a finished sample in the agreed Polar Fleece
3. Shape sample with packable crushable finish applied, blocked or knitted to the approved profile
4. Wear and wash test on the production material, then pre-production sample
5. Bulk production with in-line checks on shape, stitching and trim alignment
6. Final AQL 2.5 inspection and packing that protects the shape in transit

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and event channels — logo application and retail packing
• Outdoor and winter programmes — built for the climate it is sold in

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for OEKO-TEX Standard 100 for dyes and trims are prepared for the destination market. We ship to Felixstowe with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same pairing and packing.

FAQ

Which compliance documents do you provide?

We prepare OEKO-TEX Standard 100 for dyes and trims and the supporting test reports for the destination market.

How long does sampling take?

A first sample takes 7 working days, and each revision about 5 days.

What is the minimum order?

Programmes start at 300 pieces per style per finish. Mixed sizes are fine within one style.

Do you ship to our forwarder?

Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.

Start your hat, scarf & glove set programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.