Custom Beanie — Viscose with Metal Buckle Strap
We supply beanie to brands, retailers, uniform and promotional programmes, made in Viscose with metal buckle strap for childrenswear and schoolwear. On headwear the specification that decides whether it sells or comes back is recovery after wear, because a beanie that bags out is dead — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 500 pieces per style.
The failures here are predictable: a supplier who disappears once the deposit is paid, or inconsistent sizing between production runs. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare CPSIA and California Prop 65 compliance so the container clears instead of missing the season it was bought for.
Specification
| Product | Beanie |
|---|---|
| Length | standard beanie |
| Knit | jacquard knit |
| Material | Viscose |
| Construction / finish | Metal Buckle Strap |
| Colour options | 24 shades, Pantone matched |
| Packing | retail hangtag |
| MOQ | 500 pieces per style |
| Sampling | 14 working days, 5 days per revision |
| Bulk lead time | 25-30 days after approval |
| Compliance | CPSIA and California Prop 65 compliance; salt spray test for metal finishes |
| Ship to | Los Angeles or New York (North America) |
What buyers can customise
- Moisture-Wicking Finish — available on Viscose, quoted per position and per colour.
- Fringe Finish — available on Viscose, quoted per position and per colour.
- Rib Knit — available on Viscose, quoted per position and per colour.
- Wire Brim — available on Viscose, quoted per position and per colour.
- Distressed Wash — available on Viscose, quoted per position and per colour.
- Flat Embroidery — available on Viscose, quoted per position and per colour.
- Sandwich Brim — available on Viscose, quoted per position and per colour.
How we produce it
- Specification review — shape, measurement, material and target price
- Material sourcing and a finished sample in the agreed Viscose
- Shape sample with metal buckle strap applied, blocked or knitted to the approved profile
- Wear and wash test on the production material, then pre-production sample
- Bulk production with in-line checks on shape, stitching and trim alignment
- Final AQL 2.5 inspection and packing that protects the shape in transit
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and event channels — logo application and retail packing
- Outdoor and winter programmes — built for the climate it is sold in
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for salt spray test for metal finishes are prepared for the destination market. We ship to Los Angeles or New York with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same recovery after wear.
FAQ
What is the minimum order?
Programmes start at 500 pieces per style per finish. Mixed sizes are fine within one style.
How long does sampling take?
A first sample takes 14 working days, and each revision about 5 days.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
Do you ship to our forwarder?
Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.
Start your beanie programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
