Custom Beanie — Sequin Fabric with Flat Embroidery
We supply beanie to brands, retailers, uniform and promotional programmes, made in Sequin Fabric with flat embroidery for outerwear and jacket programmes. On headwear the specification that decides whether it sells or comes back is pilling resistance on the outer surface — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 500 pieces per style.
The failures here are predictable: a finish that tarnishes or rubs off after washing, or inconsistent sizing between production runs. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GSO conformity with Arabic labelling so the container clears instead of missing the season it was bought for.
Specification
| Product | Beanie |
|---|---|
| Length | standard beanie |
| Knit | jacquard knit |
| Material | Sequin Fabric |
| Construction / finish | Flat Embroidery |
| Colour options | 12 shades, Pantone matched |
| Packing | retail hangtag |
| MOQ | 500 pieces per style |
| Sampling | 7 working days, 3 days per revision |
| Bulk lead time | 20-30 days after approval |
| Compliance | GSO conformity with Arabic labelling; colour fastness to washing, rubbing and light |
| Ship to | Jebel Ali (the Middle East) |
What buyers can customise
- Flat Embroidery — available on Sequin Fabric, quoted per position and per colour.
- Unstructured Crown — available on Sequin Fabric, quoted per position and per colour.
- Die-Casting — available on Sequin Fabric, quoted per position and per colour.
- Yarn Dyeing — available on Sequin Fabric, quoted per position and per colour.
- Anti-Rust Treatment — available on Sequin Fabric, quoted per position and per colour.
- Rib Knit — available on Sequin Fabric, quoted per position and per colour.
- Fleece Lining — available on Sequin Fabric, quoted per position and per colour.
How we produce it
- Specification review — shape, measurement, material and target price
- Material sourcing and a finished sample in the agreed Sequin Fabric
- Shape sample with flat embroidery applied, blocked or knitted to the approved profile
- Wear and wash test on the production material, then pre-production sample
- Bulk production with in-line checks on shape, stitching and trim alignment
- Final AQL 2.5 inspection and packing that protects the shape in transit
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and event channels — logo application and retail packing
- Outdoor and winter programmes — built for the climate it is sold in
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for colour fastness to washing, rubbing and light are prepared for the destination market. We ship to Jebel Ali with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same pilling resistance on the outer surface.
FAQ
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
How long does sampling take?
A first sample takes 7 working days, and each revision about 3 days.
How do you control colour on reorders?
The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.
Do you ship to our forwarder?
Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.
Start your beanie programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
