Custom Hat, Scarf & Glove Set in Foam Front Panel with Contrast Piping for E-commerce and Small-Batch Brands

Custom Hat, Scarf & Glove Set — Foam Front Panel with Contrast Piping

We supply hat, scarf & glove set to brands, retailers, uniform and promotional programmes, made in Foam Front Panel with contrast piping for e-commerce and small-batch brands. On headwear the specification that decides whether it sells or comes back is shade match across three different pieces, which is the failure customers notice — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 3000 pieces per style.

The failures here are predictable: unclear responsibility when a defect shows up after washing, or inconsistent sizing between production runs. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare CPSIA and California Prop 65 compliance so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Structured Front Panel — available on Foam Front Panel, quoted per position and per colour.
• Braided Weave — available on Foam Front Panel, quoted per position and per colour.
• Stamping — available on Foam Front Panel, quoted per position and per colour.
• Overlocked Edge — available on Foam Front Panel, quoted per position and per colour.
• Flat Brim — available on Foam Front Panel, quoted per position and per colour.
• Edge Binding — available on Foam Front Panel, quoted per position and per colour.
• Enzyme Wash — available on Foam Front Panel, quoted per position and per colour.

How we produce it

1. Specification review — shape, measurement, material and target price
2. Material sourcing and a finished sample in the agreed Foam Front Panel
3. Shape sample with contrast piping applied, blocked or knitted to the approved profile
4. Wear and wash test on the production material, then pre-production sample
5. Bulk production with in-line checks on shape, stitching and trim alignment
6. Final AQL 2.5 inspection and packing that protects the shape in transit

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and event channels — logo application and retail packing
• Outdoor and winter programmes — built for the climate it is sold in

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for GRS recycled content claim are prepared for the destination market. We ship to Los Angeles or New York with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same shade match across three different pieces.

FAQ

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

How long does sampling take?

A first sample takes 10 working days, and each revision about 4 days.

Start your hat, scarf & glove set programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.