Custom Beanie in Pressed Wool Felt with Overlocked Edge for Outerwear and Jacket Programmes

Custom Beanie — Pressed Wool Felt with Overlocked Edge

We supply beanie to brands, retailers, uniform and promotional programmes, made in Pressed Wool Felt with overlocked edge for denim and workwear programmes. On headwear the specification that decides whether it sells or comes back is recovery after wear, because a beanie that bags out is dead — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 3000 pieces per style.

The failures here are predictable: a finish that tarnishes or rubs off after washing, or minimum order quantities far above what a growing brand can absorb. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare CPSIA and California Prop 65 compliance so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Anti-Pilling Finish — available on Pressed Wool Felt, quoted per position and per colour.
• Unstructured Crown — available on Pressed Wool Felt, quoted per position and per colour.
• Epoxy Dome — available on Pressed Wool Felt, quoted per position and per colour.
• Stamping — available on Pressed Wool Felt, quoted per position and per colour.
• Anti-Rust Treatment — available on Pressed Wool Felt, quoted per position and per colour.
• Rhinestone Setting — available on Pressed Wool Felt, quoted per position and per colour.
• Woven Jacquard — available on Pressed Wool Felt, quoted per position and per colour.

How we produce it

1. Specification review — shape, measurement, material and target price
2. Material sourcing and a finished sample in the agreed Pressed Wool Felt
3. Shape sample with overlocked edge applied, blocked or knitted to the approved profile
4. Wear and wash test on the production material, then pre-production sample
5. Bulk production with in-line checks on shape, stitching and trim alignment
6. Final AQL 2.5 inspection and packing that protects the shape in transit

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and event channels — logo application and retail packing
• Outdoor and winter programmes — built for the climate it is sold in

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for OEKO-TEX Standard 100 for dyes and trims are prepared for the destination market. We ship to Los Angeles or New York with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same recovery after wear.

FAQ

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

Which compliance documents do you provide?

We prepare OEKO-TEX Standard 100 for dyes and trims and the supporting test reports for the destination market.

What is the minimum order?

Programmes start at 3000 pieces per style per finish. Mixed sizes are fine within one style.

Start your beanie programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.