Custom Beanie in Pressed Wool Felt with Woven Jacquard for E-commerce and Small-Batch Brands

Custom Beanie — Pressed Wool Felt with Woven Jacquard

We supply beanie to brands, retailers, uniform and promotional programmes, made in Pressed Wool Felt with woven jacquard for bridal and eveningwear studios. On headwear the specification that decides whether it sells or comes back is recovery after wear, because a beanie that bags out is dead — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 3000 pieces per style.

The failures here are predictable: colour drift between the approved sample and the bulk trim, or a supplier who disappears once the deposit is paid. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare UKCA and REACH documentation so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Sandwich Brim — available on Pressed Wool Felt, quoted per position and per colour.
• Powder Coating — available on Pressed Wool Felt, quoted per position and per colour.
• Edge Binding — available on Pressed Wool Felt, quoted per position and per colour.
• Yarn Dyeing — available on Pressed Wool Felt, quoted per position and per colour.
• Hand Crochet — available on Pressed Wool Felt, quoted per position and per colour.
• Structured Front Panel — available on Pressed Wool Felt, quoted per position and per colour.
• Knitted Structure — available on Pressed Wool Felt, quoted per position and per colour.

How we produce it

1. Specification review — shape, measurement, material and target price
2. Material sourcing and a finished sample in the agreed Pressed Wool Felt
3. Shape sample with woven jacquard applied, blocked or knitted to the approved profile
4. Wear and wash test on the production material, then pre-production sample
5. Bulk production with in-line checks on shape, stitching and trim alignment
6. Final AQL 2.5 inspection and packing that protects the shape in transit

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and event channels — logo application and retail packing
• Outdoor and winter programmes — built for the climate it is sold in

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for EN 71 part 3 for decorative components are prepared for the destination market. We ship to Felixstowe with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same recovery after wear.

FAQ

What is the minimum order?

Programmes start at 3000 pieces per style per finish. Mixed sizes are fine within one style.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

Which compliance documents do you provide?

We prepare EN 71 part 3 for decorative components and the supporting test reports for the destination market.

Start your beanie programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.