Custom Ethnic Hat — Polyester Mesh with Piece Dyeing
We supply ethnic hat to brands, retailers, uniform and promotional programmes, made in Polyester Mesh with piece dyeing for outerwear and jacket programmes. On headwear the specification that decides whether it sells or comes back is consistency of hand-finished detail between units — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 300 pieces per style.
The failures here are predictable: a supplier who disappears once the deposit is paid, or inconsistent sizing between production runs. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GSO conformity with Arabic labelling so the container clears instead of missing the season it was bought for.
Specification
| Product | Ethnic Hat |
|---|---|
| Size | M / 57 cm |
| Type | handwoven ethnic hat |
| Material | Polyester Mesh |
| Construction / finish | Piece Dyeing |
| Colour options | 8 shades, Pantone matched |
| Packing | bulk carton |
| MOQ | 300 pieces per style |
| Sampling | 7 working days, 4 days per revision |
| Bulk lead time | 20-30 days after approval |
| Compliance | GSO conformity with Arabic labelling; salt spray test for metal finishes |
| Ship to | Jebel Ali (the Middle East) |
What buyers can customise
- Intarsia Knit — available on Polyester Mesh, quoted per position and per colour.
- Flat Brim — available on Polyester Mesh, quoted per position and per colour.
- Sublimation Printing — available on Polyester Mesh, quoted per position and per colour.
- Injection Moulding — available on Polyester Mesh, quoted per position and per colour.
- Stamping — available on Polyester Mesh, quoted per position and per colour.
- Die-Casting — available on Polyester Mesh, quoted per position and per colour.
- Screen Printing — available on Polyester Mesh, quoted per position and per colour.
How we produce it
- Specification review — shape, measurement, material and target price
- Material sourcing and a finished sample in the agreed Polyester Mesh
- Shape sample with piece dyeing applied, blocked or knitted to the approved profile
- Wear and wash test on the production material, then pre-production sample
- Bulk production with in-line checks on shape, stitching and trim alignment
- Final AQL 2.5 inspection and packing that protects the shape in transit
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and event channels — logo application and retail packing
- Outdoor and winter programmes — built for the climate it is sold in
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for salt spray test for metal finishes are prepared for the destination market. We ship to Jebel Ali with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same consistency of hand-finished detail between units.
FAQ
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
What is the minimum order?
Programmes start at 300 pieces per style per finish. Mixed sizes are fine within one style.
How long does sampling take?
A first sample takes 7 working days, and each revision about 4 days.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
Start your ethnic hat programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
