Custom Fedora — Cordura Nylon with Sandwich Brim
We supply fedora to brands, retailers, uniform and promotional programmes, made in Cordura Nylon with sandwich brim for uniform and corporate programmes. On headwear the specification that decides whether it sells or comes back is ribbon stitching, because an unravelled band is the first return — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 500 pieces per style.
The failures here are predictable: colour drift between the approved sample and the bulk trim, or minimum order quantities far above what a growing brand can absorb. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare SNI or SIRIM documentation per destination so the container clears instead of missing the season it was bought for.
Specification
| Product | Fedora |
|---|---|
| Brim | 8 cm brim |
| Type | crushable fedora |
| Material | Cordura Nylon |
| Construction / finish | Sandwich Brim |
| Colour options | 6 shades, Pantone matched |
| Packing | single polybag |
| MOQ | 500 pieces per style |
| Sampling | 14 working days, 4 days per revision |
| Bulk lead time | 15-30 days after approval |
| Compliance | SNI or SIRIM documentation per destination; OEKO-TEX Standard 100 for dyes and trims |
| Ship to | Jakarta or Port Klang (Asia-Pacific) |
What buyers can customise
- Embroidery — available on Cordura Nylon, quoted per position and per colour.
- Reflective Piping — available on Cordura Nylon, quoted per position and per colour.
- Metal Eyelet — available on Cordura Nylon, quoted per position and per colour.
- Soft Enamel Fill — available on Cordura Nylon, quoted per position and per colour.
- Edge Binding — available on Cordura Nylon, quoted per position and per colour.
- Water-Repellent Finish — available on Cordura Nylon, quoted per position and per colour.
- Straw Weaving — available on Cordura Nylon, quoted per position and per colour.
How we produce it
- Specification review — shape, measurement, material and target price
- Material sourcing and a finished sample in the agreed Cordura Nylon
- Shape sample with sandwich brim applied, blocked or knitted to the approved profile
- Wear and wash test on the production material, then pre-production sample
- Bulk production with in-line checks on shape, stitching and trim alignment
- Final AQL 2.5 inspection and packing that protects the shape in transit
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and event channels — logo application and retail packing
- Outdoor and winter programmes — built for the climate it is sold in
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for OEKO-TEX Standard 100 for dyes and trims are prepared for the destination market. We ship to Jakarta or Port Klang with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same ribbon stitching.
FAQ
Which compliance documents do you provide?
We prepare OEKO-TEX Standard 100 for dyes and trims and the supporting test reports for the destination market.
How long does sampling take?
A first sample takes 14 working days, and each revision about 4 days.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
Do you ship to our forwarder?
Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.
Start your fedora programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
