Custom Beret — Shell with Rubber Coating
We supply beret to brands, retailers, uniform and promotional programmes, made in Shell with rubber coating for childrenswear and schoolwear. On headwear the specification that decides whether it sells or comes back is shape retention after blocking, so it sits correctly on the head — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 1000 pieces per style.
The failures here are predictable: inconsistent sizing between production runs, or shade variation within one carton. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare REACH and GPSR documentation so the container clears instead of missing the season it was bought for.
Specification
| Product | Beret |
|---|---|
| Diameter | 30 cm |
| Type | artist beret |
| Material | Shell |
| Construction / finish | Rubber Coating |
| Colour options | 8 shades, Pantone matched |
| Packing | bulk carton |
| MOQ | 1000 pieces per style |
| Sampling | 10 working days, 5 days per revision |
| Bulk lead time | 20-55 days after approval |
| Compliance | REACH and GPSR documentation; GRS recycled content claim |
| Ship to | Rotterdam or Felixstowe (Europe) |
What buyers can customise
- Shapeable Edge — available on Shell, quoted per position and per colour.
- Heat-Cut Edge — available on Shell, quoted per position and per colour.
- Crochet — available on Shell, quoted per position and per colour.
- Sewn Edge — available on Shell, quoted per position and per colour.
- Metal Eyelet — available on Shell, quoted per position and per colour.
- Embroidered Patch — available on Shell, quoted per position and per colour.
- Sandwich Brim — available on Shell, quoted per position and per colour.
How we produce it
- Specification review — shape, measurement, material and target price
- Material sourcing and a finished sample in the agreed Shell
- Shape sample with rubber coating applied, blocked or knitted to the approved profile
- Wear and wash test on the production material, then pre-production sample
- Bulk production with in-line checks on shape, stitching and trim alignment
- Final AQL 2.5 inspection and packing that protects the shape in transit
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and event channels — logo application and retail packing
- Outdoor and winter programmes — built for the climate it is sold in
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for GRS recycled content claim are prepared for the destination market. We ship to Rotterdam or Felixstowe with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same shape retention after blocking.
FAQ
What is the minimum order?
Programmes start at 1000 pieces per style per finish. Mixed sizes are fine within one style.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
How long does sampling take?
A first sample takes 10 working days, and each revision about 5 days.
Start your beret programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
