Custom Peaked Cap — PVC with Screen Printing
We supply peaked cap to brands, retailers, uniform and promotional programmes, made in PVC with screen printing for e-commerce and small-batch brands. On headwear the specification that decides whether it sells or comes back is panel tension on the structured front — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 300 pieces per style.
The failures here are predictable: packing that arrives mixed and unusable on the line, or colour drift between the approved sample and the bulk trim. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GSO conformity with Arabic labelling so the container clears instead of missing the season it was bought for.
Specification
| Product | Peaked Cap |
|---|---|
| Brim | curved brim |
| Type | flat brim snapback |
| Material | PVC |
| Construction / finish | Screen Printing |
| Colour options | 16 shades, Pantone matched |
| Packing | retail hangtag |
| MOQ | 300 pieces per style |
| Sampling | 14 working days, 4 days per revision |
| Bulk lead time | 15-40 days after approval |
| Compliance | GSO conformity with Arabic labelling; OEKO-TEX Standard 100 for dyes and trims |
| Ship to | Jebel Ali (the Middle East) |
What buyers can customise
- Die-Casting — available on PVC, quoted per position and per colour.
- Beaded Detail — available on PVC, quoted per position and per colour.
- All-Over Print — available on PVC, quoted per position and per colour.
- Felt Blocking — available on PVC, quoted per position and per colour.
- Digital Printing — available on PVC, quoted per position and per colour.
- Offset Printing — available on PVC, quoted per position and per colour.
- Contrast Piping — available on PVC, quoted per position and per colour.
How we produce it
- Specification review — shape, measurement, material and target price
- Material sourcing and a finished sample in the agreed PVC
- Shape sample with screen printing applied, blocked or knitted to the approved profile
- Wear and wash test on the production material, then pre-production sample
- Bulk production with in-line checks on shape, stitching and trim alignment
- Final AQL 2.5 inspection and packing that protects the shape in transit
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and event channels — logo application and retail packing
- Outdoor and winter programmes — built for the climate it is sold in
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for OEKO-TEX Standard 100 for dyes and trims are prepared for the destination market. We ship to Jebel Ali with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same panel tension on the structured front.
FAQ
How long does sampling take?
A first sample takes 14 working days, and each revision about 4 days.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
What packing options are available?
Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.
How do you control colour on reorders?
The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.
Start your peaked cap programme
Tell us the quantity, the target price and the delivery window — we will tell you what is realistic before you commit.
