Custom Peaked Cap in Tulle with Heat Transfer Printing for Outerwear and Jacket Programmes

Custom Peaked Cap — Tulle with Heat Transfer Printing

We supply peaked cap to brands, retailers, uniform and promotional programmes, made in Tulle with heat transfer printing for childrenswear and schoolwear. On headwear the specification that decides whether it sells or comes back is panel tension on the structured front — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 3000 pieces per style.

The failures here are predictable: shade variation within one carton, or minimum order quantities far above what a growing brand can absorb. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare REACH and GPSR documentation so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Hard Enamel Fill — available on Tulle, quoted per position and per colour.
• Wire Brim — available on Tulle, quoted per position and per colour.
• Flat Embroidery — available on Tulle, quoted per position and per colour.
• Tassel Finish — available on Tulle, quoted per position and per colour.
• Overlocked Edge — available on Tulle, quoted per position and per colour.
• Fleece Lining — available on Tulle, quoted per position and per colour.
• Sublimation Printing — available on Tulle, quoted per position and per colour.

How we produce it

1. Specification review — shape, measurement, material and target price
2. Material sourcing and a finished sample in the agreed Tulle
3. Shape sample with heat transfer printing applied, blocked or knitted to the approved profile
4. Wear and wash test on the production material, then pre-production sample
5. Bulk production with in-line checks on shape, stitching and trim alignment
6. Final AQL 2.5 inspection and packing that protects the shape in transit

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and event channels — logo application and retail packing
• Outdoor and winter programmes — built for the climate it is sold in

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for EN 71 part 3 for decorative components are prepared for the destination market. We ship to Rotterdam or Felixstowe with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same panel tension on the structured front.

FAQ

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

How long does sampling take?

A first sample takes 7 working days, and each revision about 3 days.

Which compliance documents do you provide?

We prepare EN 71 part 3 for decorative components and the supporting test reports for the destination market.

Start your peaked cap programme

If you already have a supplier, send us the last problem you had with them. That is usually where we start.