Custom Peaked Cap — Ripstop Nylon with Distressed Wash
We supply peaked cap to brands, retailers, uniform and promotional programmes, made in Ripstop Nylon with distressed wash for childrenswear and schoolwear. On headwear the specification that decides whether it sells or comes back is panel tension on the structured front — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 300 pieces per style.
The failures here are predictable: minimum order quantities far above what a growing brand can absorb, or colour drift between the approved sample and the bulk trim. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare SNI or SIRIM documentation per destination so the container clears instead of missing the season it was bought for.
Specification
| Product | Peaked Cap |
|---|---|
| Brim | 6.5 cm flat brim |
| Type | wool peaked cap |
| Material | Ripstop Nylon |
| Construction / finish | Distressed Wash |
| Colour options | 6 shades, Pantone matched |
| Packing | single polybag |
| MOQ | 300 pieces per style |
| Sampling | 12 working days, 4 days per revision |
| Bulk lead time | 15-30 days after approval |
| Compliance | SNI or SIRIM documentation per destination; EN 71 part 3 for decorative components |
| Ship to | Jakarta or Port Klang (Asia-Pacific) |
What buyers can customise
- Rhinestone Setting — available on Ripstop Nylon, quoted per position and per colour.
- Anti-UV Finish — available on Ripstop Nylon, quoted per position and per colour.
- Woven Patch — available on Ripstop Nylon, quoted per position and per colour.
- Snapback Closure — available on Ripstop Nylon, quoted per position and per colour.
- Flat Brim — available on Ripstop Nylon, quoted per position and per colour.
- Shapeable Edge — available on Ripstop Nylon, quoted per position and per colour.
- Embossing — available on Ripstop Nylon, quoted per position and per colour.
How we produce it
- Specification review — shape, measurement, material and target price
- Material sourcing and a finished sample in the agreed Ripstop Nylon
- Shape sample with distressed wash applied, blocked or knitted to the approved profile
- Wear and wash test on the production material, then pre-production sample
- Bulk production with in-line checks on shape, stitching and trim alignment
- Final AQL 2.5 inspection and packing that protects the shape in transit
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and event channels — logo application and retail packing
- Outdoor and winter programmes — built for the climate it is sold in
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for EN 71 part 3 for decorative components are prepared for the destination market. We ship to Jakarta or Port Klang with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same panel tension on the structured front.
FAQ
How do you control colour on reorders?
The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
How long does sampling take?
A first sample takes 12 working days, and each revision about 4 days.
Do you ship to our forwarder?
Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.
Start your peaked cap programme
Tell us the quantity, the target price and the delivery window — we will tell you what is realistic before you commit.
