Custom Beret in Cashmere Blend Yarn with Epoxy Dome for Childrenswear and Schoolwear

Custom Beret — Cashmere Blend Yarn with Epoxy Dome

We supply beret to brands, retailers, uniform and promotional programmes, made in Cashmere Blend Yarn with epoxy dome for bridal and eveningwear studios. On headwear the specification that decides whether it sells or comes back is sweatband material, which is where cheap berets fail first — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 1000 pieces per style.

The failures here are predictable: inconsistent sizing between production runs, or unclear responsibility when a defect shows up after washing. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Piece Dyeing — available on Cashmere Blend Yarn, quoted per position and per colour.
• Powder Coating — available on Cashmere Blend Yarn, quoted per position and per colour.
• Packable Crushable Finish — available on Cashmere Blend Yarn, quoted per position and per colour.
• Epoxy Dome — available on Cashmere Blend Yarn, quoted per position and per colour.
• Fringe Finish — available on Cashmere Blend Yarn, quoted per position and per colour.
• Yarn Dyeing — available on Cashmere Blend Yarn, quoted per position and per colour.
• Metal Eyelet — available on Cashmere Blend Yarn, quoted per position and per colour.

How we produce it

1. Specification review — shape, measurement, material and target price
2. Material sourcing and a finished sample in the agreed Cashmere Blend Yarn
3. Shape sample with epoxy dome applied, blocked or knitted to the approved profile
4. Wear and wash test on the production material, then pre-production sample
5. Bulk production with in-line checks on shape, stitching and trim alignment
6. Final AQL 2.5 inspection and packing that protects the shape in transit

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and event channels — logo application and retail packing
• Outdoor and winter programmes — built for the climate it is sold in

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for GRS recycled content claim are prepared for the destination market. We ship to Shanghai or Shenzhen with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same sweatband material.

FAQ

What is the minimum order?

Programmes start at 1000 pieces per style per finish. Mixed sizes are fine within one style.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

Which compliance documents do you provide?

We prepare GRS recycled content claim and the supporting test reports for the destination market.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

Start your beret programme

Tell us the quantity, the target price and the delivery window — we will tell you what is realistic before you commit.