Custom Peaked Cap — Polyester Mesh with Elastic Sweatband
We supply peaked cap to brands, retailers, uniform and promotional programmes, made in Polyester Mesh with elastic sweatband for bridal and eveningwear studios. On headwear the specification that decides whether it sells or comes back is panel tension on the structured front — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 2000 pieces per style.
The failures here are predictable: packing that arrives mixed and unusable on the line, or inconsistent sizing between production runs. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare SNI or SIRIM documentation per destination so the container clears instead of missing the season it was bought for.
Specification
| Product | Peaked Cap |
|---|---|
| Brim | structured brim |
| Type | flat brim snapback |
| Material | Polyester Mesh |
| Construction / finish | Elastic Sweatband |
| Colour options | 16 shades, Pantone matched |
| Packing | assorted size pack |
| MOQ | 2000 pieces per style |
| Sampling | 12 working days, 5 days per revision |
| Bulk lead time | 25-40 days after approval |
| Compliance | SNI or SIRIM documentation per destination; salt spray test for metal finishes |
| Ship to | Jakarta or Port Klang (Asia-Pacific) |
What buyers can customise
- Anti-UV Finish — available on Polyester Mesh, quoted per position and per colour.
- Powder Coating — available on Polyester Mesh, quoted per position and per colour.
- Sequin Stitching — available on Polyester Mesh, quoted per position and per colour.
- Pantone Colour Matching — available on Polyester Mesh, quoted per position and per colour.
- Metal Eyelet — available on Polyester Mesh, quoted per position and per colour.
- Embroidered Patch — available on Polyester Mesh, quoted per position and per colour.
- 3D Puff Embroidery — available on Polyester Mesh, quoted per position and per colour.
How we produce it
- Specification review — shape, measurement, material and target price
- Material sourcing and a finished sample in the agreed Polyester Mesh
- Shape sample with elastic sweatband applied, blocked or knitted to the approved profile
- Wear and wash test on the production material, then pre-production sample
- Bulk production with in-line checks on shape, stitching and trim alignment
- Final AQL 2.5 inspection and packing that protects the shape in transit
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and event channels — logo application and retail packing
- Outdoor and winter programmes — built for the climate it is sold in
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for salt spray test for metal finishes are prepared for the destination market. We ship to Jakarta or Port Klang with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same panel tension on the structured front.
FAQ
Do you ship to our forwarder?
Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.
Which compliance documents do you provide?
We prepare salt spray test for metal finishes and the supporting test reports for the destination market.
How long does sampling take?
A first sample takes 12 working days, and each revision about 5 days.
What packing options are available?
Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.
Start your peaked cap programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
