Custom Dad Hat in Recycled Polyester Yarn with Sewn Edge for Uniform and Corporate Programmes

Custom Dad Hat — Recycled Polyester Yarn with Sewn Edge

We supply dad hat to brands, retailers, uniform and promotional programmes, made in Recycled Polyester Yarn with sewn edge for uniform and corporate programmes. On headwear the specification that decides whether it sells or comes back is shape change after washing, measured against the approved sample — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 300 pieces per style.

The failures here are predictable: shade variation within one carton, or a finish that tarnishes or rubs off after washing. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Moisture-Wicking Finish — available on Recycled Polyester Yarn, quoted per position and per colour.
• 3D Puff Embroidery — available on Recycled Polyester Yarn, quoted per position and per colour.
• Shapeable Edge — available on Recycled Polyester Yarn, quoted per position and per colour.
• Powder Coating — available on Recycled Polyester Yarn, quoted per position and per colour.
• Metal Buckle Strap — available on Recycled Polyester Yarn, quoted per position and per colour.
• Structured Front Panel — available on Recycled Polyester Yarn, quoted per position and per colour.
• Tassel Finish — available on Recycled Polyester Yarn, quoted per position and per colour.

How we produce it

1. Specification review — shape, measurement, material and target price
2. Material sourcing and a finished sample in the agreed Recycled Polyester Yarn
3. Shape sample with sewn edge applied, blocked or knitted to the approved profile
4. Wear and wash test on the production material, then pre-production sample
5. Bulk production with in-line checks on shape, stitching and trim alignment
6. Final AQL 2.5 inspection and packing that protects the shape in transit

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and event channels — logo application and retail packing
• Outdoor and winter programmes — built for the climate it is sold in

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for EN 71 part 3 for decorative components are prepared for the destination market. We ship to Shanghai or Shenzhen with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same shape change after washing.

FAQ

Which compliance documents do you provide?

We prepare EN 71 part 3 for decorative components and the supporting test reports for the destination market.

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

Do you ship to our forwarder?

Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.

How long does sampling take?

A first sample takes 12 working days, and each revision about 5 days.

Start your dad hat programme

If you already have a supplier, send us the last problem you had with them. That is usually where we start.