Custom Dad Hat in Polycarbonate with Snapback Closure for Uniform and Corporate Programmes

Custom Dad Hat — Polycarbonate with Snapback Closure

We supply dad hat to brands, retailers, uniform and promotional programmes, made in Polycarbonate with snapback closure for bridal and eveningwear studios. On headwear the specification that decides whether it sells or comes back is embroidery density on washed cotton, which puckers if it is wrong — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 3000 pieces per style.

The failures here are predictable: a finish that tarnishes or rubs off after washing, or minimum order quantities far above what a growing brand can absorb. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GSO conformity with Arabic labelling so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Paint Spray — available on Polycarbonate, quoted per position and per colour.
• Fringe Finish — available on Polycarbonate, quoted per position and per colour.
• Rhinestone Setting — available on Polycarbonate, quoted per position and per colour.
• Debossing — available on Polycarbonate, quoted per position and per colour.
• Ultrasonic Welding — available on Polycarbonate, quoted per position and per colour.
• Pantone Colour Matching — available on Polycarbonate, quoted per position and per colour.
• Structured Front Panel — available on Polycarbonate, quoted per position and per colour.

How we produce it

1. Specification review — shape, measurement, material and target price
2. Material sourcing and a finished sample in the agreed Polycarbonate
3. Shape sample with snapback closure applied, blocked or knitted to the approved profile
4. Wear and wash test on the production material, then pre-production sample
5. Bulk production with in-line checks on shape, stitching and trim alignment
6. Final AQL 2.5 inspection and packing that protects the shape in transit

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and event channels — logo application and retail packing
• Outdoor and winter programmes — built for the climate it is sold in

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for colour fastness to washing, rubbing and light are prepared for the destination market. We ship to Jebel Ali with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same embroidery density on washed cotton.

FAQ

Do you ship to our forwarder?

Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

Which compliance documents do you provide?

We prepare colour fastness to washing, rubbing and light and the supporting test reports for the destination market.

What is the minimum order?

Programmes start at 3000 pieces per style per finish. Mixed sizes are fine within one style.

Start your dad hat programme

If you already have a supplier, send us the last problem you had with them. That is usually where we start.