Custom Peaked Cap in Recycled PET Fabric with Snapback Closure for Denim and Workwear Programmes

Custom Peaked Cap — Recycled PET Fabric with Snapback Closure

We supply peaked cap to brands, retailers, uniform and promotional programmes, made in Recycled PET Fabric with snapback closure for e-commerce and small-batch brands. On headwear the specification that decides whether it sells or comes back is panel tension on the structured front — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 3000 pieces per style.

The failures here are predictable: minimum order quantities far above what a growing brand can absorb, or inconsistent sizing between production runs. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GSO conformity with Arabic labelling so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Distressed Wash — available on Recycled PET Fabric, quoted per position and per colour.
• Structured Front Panel — available on Recycled PET Fabric, quoted per position and per colour.
• Snapback Closure — available on Recycled PET Fabric, quoted per position and per colour.
• Enzyme Wash — available on Recycled PET Fabric, quoted per position and per colour.
• Unstructured Crown — available on Recycled PET Fabric, quoted per position and per colour.
• Sewn Edge — available on Recycled PET Fabric, quoted per position and per colour.
• Leather Patch — available on Recycled PET Fabric, quoted per position and per colour.

How we produce it

1. Specification review — shape, measurement, material and target price
2. Material sourcing and a finished sample in the agreed Recycled PET Fabric
3. Shape sample with snapback closure applied, blocked or knitted to the approved profile
4. Wear and wash test on the production material, then pre-production sample
5. Bulk production with in-line checks on shape, stitching and trim alignment
6. Final AQL 2.5 inspection and packing that protects the shape in transit

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and event channels — logo application and retail packing
• Outdoor and winter programmes — built for the climate it is sold in

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for EN 71 part 3 for decorative components are prepared for the destination market. We ship to Jebel Ali with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same panel tension on the structured front.

FAQ

How long does sampling take?

A first sample takes 12 working days, and each revision about 5 days.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

Start your peaked cap programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.