Custom Dad Hat in Recycled PET Fabric with Metal Eyelet for E-commerce and Small-Batch Brands

Custom Dad Hat — Recycled PET Fabric with Metal Eyelet

We supply dad hat to brands, retailers, uniform and promotional programmes, made in Recycled PET Fabric with metal eyelet for uniform and corporate programmes. On headwear the specification that decides whether it sells or comes back is shape change after washing, measured against the approved sample — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 2000 pieces per style.

The failures here are predictable: shade variation within one carton, or a finish that tarnishes or rubs off after washing. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GSO conformity with Arabic labelling so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Anti-Pilling Finish — available on Recycled PET Fabric, quoted per position and per colour.
• Elastic Sweatband — available on Recycled PET Fabric, quoted per position and per colour.
• Chenille Patch — available on Recycled PET Fabric, quoted per position and per colour.
• Heat Transfer Printing — available on Recycled PET Fabric, quoted per position and per colour.
• Wire Brim — available on Recycled PET Fabric, quoted per position and per colour.
• Packable Crushable Finish — available on Recycled PET Fabric, quoted per position and per colour.
• Quilted Lining — available on Recycled PET Fabric, quoted per position and per colour.

How we produce it

1. Specification review — shape, measurement, material and target price
2. Material sourcing and a finished sample in the agreed Recycled PET Fabric
3. Shape sample with metal eyelet applied, blocked or knitted to the approved profile
4. Wear and wash test on the production material, then pre-production sample
5. Bulk production with in-line checks on shape, stitching and trim alignment
6. Final AQL 2.5 inspection and packing that protects the shape in transit

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and event channels — logo application and retail packing
• Outdoor and winter programmes — built for the climate it is sold in

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for EN 71 part 3 for decorative components are prepared for the destination market. We ship to Jebel Ali with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same shape change after washing.

FAQ

Which compliance documents do you provide?

We prepare EN 71 part 3 for decorative components and the supporting test reports for the destination market.

Do you ship to our forwarder?

Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.

How long does sampling take?

A first sample takes 12 working days, and each revision about 3 days.

What is the minimum order?

Programmes start at 2000 pieces per style per finish. Mixed sizes are fine within one style.

Start your dad hat programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.