Custom Dad Hat in Sequin Fabric with Reflective Piping for Outerwear and Jacket Programmes

Custom Dad Hat — Sequin Fabric with Reflective Piping

We supply dad hat to brands, retailers, uniform and promotional programmes, made in Sequin Fabric with reflective piping for e-commerce and small-batch brands. On headwear the specification that decides whether it sells or comes back is shape change after washing, measured against the approved sample — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 3000 pieces per style.

The failures here are predictable: a finish that tarnishes or rubs off after washing, or colour drift between the approved sample and the bulk trim. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare SNI or SIRIM documentation per destination so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Hot Foil Stamping — available on Sequin Fabric, quoted per position and per colour.
• Embossing — available on Sequin Fabric, quoted per position and per colour.
• Hard Enamel Fill — available on Sequin Fabric, quoted per position and per colour.
• Soft Enamel Fill — available on Sequin Fabric, quoted per position and per colour.
• Pantone Colour Matching — available on Sequin Fabric, quoted per position and per colour.
• Structured Front Panel — available on Sequin Fabric, quoted per position and per colour.
• Anti-Pilling Finish — available on Sequin Fabric, quoted per position and per colour.

How we produce it

1. Specification review — shape, measurement, material and target price
2. Material sourcing and a finished sample in the agreed Sequin Fabric
3. Shape sample with reflective piping applied, blocked or knitted to the approved profile
4. Wear and wash test on the production material, then pre-production sample
5. Bulk production with in-line checks on shape, stitching and trim alignment
6. Final AQL 2.5 inspection and packing that protects the shape in transit

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and event channels — logo application and retail packing
• Outdoor and winter programmes — built for the climate it is sold in

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for EN 71 part 3 for decorative components are prepared for the destination market. We ship to Jakarta or Port Klang with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same shape change after washing.

FAQ

Which compliance documents do you provide?

We prepare EN 71 part 3 for decorative components and the supporting test reports for the destination market.

Do you ship to our forwarder?

Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

How long does sampling take?

A first sample takes 12 working days, and each revision about 5 days.

Start your dad hat programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.