Custom Trucker Hat in PU Leather with Overlocked Edge for Outerwear and Jacket Programmes

Custom Trucker Hat — PU Leather with Overlocked Edge

We supply trucker hat to brands, retailers, uniform and promotional programmes, made in PU Leather with overlocked edge for outerwear and jacket programmes. On headwear the specification that decides whether it sells or comes back is crown height consistency across the run — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 1000 pieces per style.

The failures here are predictable: colour drift between the approved sample and the bulk trim, or packing that arrives mixed and unusable on the line. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Dye-Sublimation Printing — available on PU Leather, quoted per position and per colour.
• Contrast Piping — available on PU Leather, quoted per position and per colour.
• Structured Front Panel — available on PU Leather, quoted per position and per colour.
• Rubber Coating — available on PU Leather, quoted per position and per colour.
• Embossing — available on PU Leather, quoted per position and per colour.
• Flat Brim — available on PU Leather, quoted per position and per colour.
• Sequin Stitching — available on PU Leather, quoted per position and per colour.

How we produce it

1. Specification review — shape, measurement, material and target price
2. Material sourcing and a finished sample in the agreed PU Leather
3. Shape sample with overlocked edge applied, blocked or knitted to the approved profile
4. Wear and wash test on the production material, then pre-production sample
5. Bulk production with in-line checks on shape, stitching and trim alignment
6. Final AQL 2.5 inspection and packing that protects the shape in transit

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and event channels — logo application and retail packing
• Outdoor and winter programmes — built for the climate it is sold in

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for salt spray test for metal finishes are prepared for the destination market. We ship to Shanghai or Shenzhen with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same crown height consistency across the run.

FAQ

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

What is the minimum order?

Programmes start at 1000 pieces per style per finish. Mixed sizes are fine within one style.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

Which compliance documents do you provide?

We prepare salt spray test for metal finishes and the supporting test reports for the destination market.

Start your trucker hat programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.