Custom Trucker Hat in Pressed Wool Felt with Water-Repellent Finish for Denim and Workwear Programmes

Custom Trucker Hat — Pressed Wool Felt with Water-Repellent Finish

We supply trucker hat to brands, retailers, uniform and promotional programmes, made in Pressed Wool Felt with water-repellent finish for outerwear and jacket programmes. On headwear the specification that decides whether it sells or comes back is foam front recovery, because a creased foam panel is permanent — so that is agreed in writing before bulk, not discovered when the first carton is unpacked. Programmes start at 300 pieces per style.

The failures here are predictable: unclear responsibility when a defect shows up after washing, or packing that arrives mixed and unusable on the line. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare CPSIA and California Prop 65 compliance so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Reflective Piping — available on Pressed Wool Felt, quoted per position and per colour.
• Pigment Dye — available on Pressed Wool Felt, quoted per position and per colour.
• Digital Printing — available on Pressed Wool Felt, quoted per position and per colour.
• Anti-Rust Treatment — available on Pressed Wool Felt, quoted per position and per colour.
• Beaded Detail — available on Pressed Wool Felt, quoted per position and per colour.
• Anti-UV Finish — available on Pressed Wool Felt, quoted per position and per colour.
• Chenille Patch — available on Pressed Wool Felt, quoted per position and per colour.

How we produce it

1. Specification review — shape, measurement, material and target price
2. Material sourcing and a finished sample in the agreed Pressed Wool Felt
3. Shape sample with water-repellent finish applied, blocked or knitted to the approved profile
4. Wear and wash test on the production material, then pre-production sample
5. Bulk production with in-line checks on shape, stitching and trim alignment
6. Final AQL 2.5 inspection and packing that protects the shape in transit

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and event channels — logo application and retail packing
• Outdoor and winter programmes — built for the climate it is sold in

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them, and shape-protected where the profile cannot be crushed. Test reports for salt spray test for metal finishes are prepared for the destination market. We ship to Los Angeles or New York with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same foam front recovery.

FAQ

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

Which compliance documents do you provide?

We prepare salt spray test for metal finishes and the supporting test reports for the destination market.

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

Start your trucker hat programme

If you already have a supplier, send us the last problem you had with them. That is usually where we start.