Custom Shawl in Cotton-Poly Blend with Puff Printing

Custom Shawl — Cotton-Poly Blend with Puff Printing

We build shawl programmes from a tech pack or a physical reference sample. This Cotton-Poly Blend version is developed for brands that need a repeatable specification: the same cloth, the same hand feel and the same fit on every reorder. Fabric, trims, puff printing and packaging are all specifiable, so the garment stays consistent across seasons and across production runs.

Most buyers come to us after one of these problems: color drift between lab dips and bulk fabric, or no reliable way to track a order once it enters production. Our response is to fix the specification first — fabric weight, shrinkage allowance, stitch density and tolerance — before a single bulk metre is cut.

Specification

What you can customise

• Beading and Embroidery — available on Cotton-Poly Blend, quoted per position and per colour.
• Distressed Finish — available on Cotton-Poly Blend, quoted per position and per colour.
• Foil Printing — available on Cotton-Poly Blend, quoted per position and per colour.
• Acid Wash — available on Cotton-Poly Blend, quoted per position and per colour.
• Tonal Embroidery — available on Cotton-Poly Blend, quoted per position and per colour.
• Woven Label — available on Cotton-Poly Blend, quoted per position and per colour.
• Heat Transfer Printing — available on Cotton-Poly Blend, quoted per position and per colour.

How we produce it

1. Tech pack review and fabric confirmation
2. Lab dips or print strike-off for approval
3. Pattern making, grading and a Cotton-Poly Blend-spec prototype
4. Fit sample and wearer test, then a pre-production sample
5. Bulk cutting with puff printing applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing

Typical applications

• Chemical and Oil & Gas — shawl uniforms, staff wear or resale programmes
• Military and Tactical — shawl uniforms, staff wear or resale programmes
• Police and Fire Departments — shawl uniforms, staff wear or resale programmes
• Agriculture and Farming — shawl uniforms, staff wear or resale programmes
• Laboratories and Pharma — shawl uniforms, staff wear or resale programmes

Quality control

Every bulk order is checked against the approved sample for shade, hand feel, measurements and workmanship. We record shrinkage, colour fastness and seam strength on the first bulk lot and hold the data as the reference for reorders, so shawl batches stay comparable over time. Inspection photos and the measurement report are sent before the balance payment is due.

FAQ

How long does sampling take?

A first prototype is typically ready in 14 working days after the tech pack is confirmed, including fabric sourcing if the base cloth is not in our stock library. Revisions add about 3 days each.

Do you provide compliance documents?

We can arrange OEKO-TEX, GOTS, BSCI, WRAP and ISO documentation as well as third-party testing reports for WRAP, and we support REACH, CPSIA and Prop 65 declarations for the relevant markets.

Can you match a specific colour?

Yes. Send us a Pantone TCX reference or a physical swatch. We return lab dips for approval and hold bulk shade within the agreed tolerance band before cutting.

What is the minimum order quantity?

Standard programmes start at 100 pieces per style and colour. We can split sizes across a size set, and for first orders we often accept a mixed-colour run to help you test the market.

Start your shawl programme

Share a reference photo or a sample garment and we will reverse-engineer the specification for your own label.