Custom Heated Shoes in Flannel with Debossing

Custom Heated Shoes — Flannel with Debossing

We build heated shoes programmes from a tech pack or a physical reference sample. This Flannel version is developed for brands that need a repeatable specification: the same cloth, the same hand feel and the same fit on every reorder. Fabric, trims, debossing and packaging are all specifiable, so the garment stays consistent across seasons and across production runs.

Most buyers come to us after one of these problems: minimum order quantities far above what a growing brand can absorb, or unclear responsibility when a defect shows up after washing. Our response is to fix the specification first — fabric weight, shrinkage allowance, stitch density and tolerance — before a single bulk metre is cut.

Specification

What you can customise

• Snow Wash — available on Flannel, quoted per position and per colour.
• Custom Drawcord — available on Flannel, quoted per position and per colour.
• 3D Puff Embroidery — available on Flannel, quoted per position and per colour.
• Placement Printing — available on Flannel, quoted per position and per colour.
• Laser Cutting — available on Flannel, quoted per position and per colour.
• Ribbed Cuff and Hem — available on Flannel, quoted per position and per colour.
• Glow-in-the-Dark Printing — available on Flannel, quoted per position and per colour.

How we produce it

1. Tech pack review and fabric confirmation
2. Lab dips or print strike-off for approval
3. Pattern making, grading and a Flannel-spec prototype
4. Fit sample and wearer test, then a pre-production sample
5. Bulk cutting with debossing applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing

Typical applications

• Pet Care and Grooming — heated shoes uniforms, staff wear or resale programmes
• Streetwear Brands — heated shoes uniforms, staff wear or resale programmes
• Spas and Salons — heated shoes uniforms, staff wear or resale programmes
• Dental and Veterinary Clinics — heated shoes uniforms, staff wear or resale programmes
• Yoga and Pilates Studios — heated shoes uniforms, staff wear or resale programmes

Quality control

Every bulk order is checked against the approved sample for shade, hand feel, measurements and workmanship. We record shrinkage, colour fastness and seam strength on the first bulk lot and hold the data as the reference for reorders, so heated shoes batches stay comparable over time. Inspection photos and the measurement report are sent before the balance payment is due.

FAQ

Do you provide compliance documents?

We can arrange OEKO-TEX, GOTS, BSCI, WRAP and ISO documentation as well as third-party testing reports for BSCI, and we support REACH, CPSIA and Prop 65 declarations for the relevant markets.

How long does sampling take?

A first prototype is typically ready in 12 working days after the tech pack is confirmed, including fabric sourcing if the base cloth is not in our stock library. Revisions add about 4 days each.

What is the minimum order quantity?

Standard programmes start at 500 pieces per style and colour. We can split sizes across a size set, and for first orders we often accept a mixed-colour run to help you test the market.

Can you match a specific colour?

Yes. Send us a Pantone TCX reference or a physical swatch. We return lab dips for approval and hold bulk shade within the agreed tolerance band before cutting.

Start your heated shoes programme

Send us your tech pack or even a rough sketch — we will come back with fabric options, a costed sample plan and a realistic production calendar.