Custom Technical Jacket in Nylon with Pleating

Custom Technical Jacket — Nylon with Pleating

We build technical jacket programmes from a tech pack or a physical reference sample. This Nylon version is developed for brands that need a repeatable specification: the same cloth, the same hand feel and the same fit on every reorder. Fabric, trims, pleating and packaging are all specifiable, so the garment stays consistent across seasons and across production runs.

Most buyers come to us after one of these problems: color drift between lab dips and bulk fabric, or inconsistent sizing between production runs. Our response is to fix the specification first — fabric weight, shrinkage allowance, stitch density and tolerance — before a single bulk metre is cut.

Specification

What you can customise

• Chain Stitch Embroidery — available on Nylon, quoted per position and per colour.
• Bonding Construction — available on Nylon, quoted per position and per colour.
• DTF Film Printing — available on Nylon, quoted per position and per colour.
• Dye-Sublimation Printing — available on Nylon, quoted per position and per colour.
• Heat Transfer Printing — available on Nylon, quoted per position and per colour.
• Flocking — available on Nylon, quoted per position and per colour.
• DTG Digital Printing — available on Nylon, quoted per position and per colour.

How we produce it

1. Tech pack review and fabric confirmation
2. Lab dips or print strike-off for approval
3. Pattern making, grading and a Nylon-spec prototype
4. Fit sample and wearer test, then a pre-production sample
5. Bulk cutting with pleating applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing

Typical applications

• Cleaning and Janitorial — technical jacket uniforms, staff wear or resale programmes
• Government and Municipal — technical jacket uniforms, staff wear or resale programmes
• Corporate Offices — technical jacket uniforms, staff wear or resale programmes
• Military and Tactical — technical jacket uniforms, staff wear or resale programmes
• Real Estate Agencies — technical jacket uniforms, staff wear or resale programmes

Quality control

Every bulk order is checked against the approved sample for shade, hand feel, measurements and workmanship. We record shrinkage, colour fastness and seam strength on the first bulk lot and hold the data as the reference for reorders, so technical jacket batches stay comparable over time. Inspection photos and the measurement report are sent before the balance payment is due.

FAQ

Do you provide compliance documents?

We can arrange OEKO-TEX, GOTS, BSCI, WRAP and ISO documentation as well as third-party testing reports for BSCI, and we support REACH, CPSIA and Prop 65 declarations for the relevant markets.

Can you match a specific colour?

Yes. Send us a Pantone TCX reference or a physical swatch. We return lab dips for approval and hold bulk shade within the agreed tolerance band before cutting.

How long does sampling take?

A first prototype is typically ready in 14 working days after the tech pack is confirmed, including fabric sourcing if the base cloth is not in our stock library. Revisions add about 4 days each.

What is the minimum order quantity?

Standard programmes start at 500 pieces per style and colour. We can split sizes across a size set, and for first orders we often accept a mixed-colour run to help you test the market.

Start your technical jacket programme

Share a reference photo or a sample garment and we will reverse-engineer the specification for your own label.