Custom Gloves & Mittens in Power Mesh with Placement Printing for Sportswear Brands

Custom Gloves & Mittens — Power Mesh with Placement Printing

We build gloves & mittens programmes from a tech pack or a physical reference sample. This Power Mesh version is developed for brands that need a repeatable specification: the same cloth, the same hand feel and the same fit on every reorder. Fabric, trims, placement printing and packaging are all specifiable, so the garment stays consistent across seasons and across production runs.

Most buyers come to us after one of these problems: inconsistent sizing between production runs, or no reliable way to track a order once it enters production. Our response is to fix the specification first — fabric weight, shrinkage allowance, stitch density and tolerance — before a single bulk metre is cut.

Specification

What you can customise

• Debossing — available on Power Mesh, quoted per position and per colour.
• 3D Puff Embroidery — available on Power Mesh, quoted per position and per colour.
• Placement Printing — available on Power Mesh, quoted per position and per colour.
• Piece Dyeing — available on Power Mesh, quoted per position and per colour.
• Garment Dyeing — available on Power Mesh, quoted per position and per colour.
• DTF Film Printing — available on Power Mesh, quoted per position and per colour.
• Screen Printing — available on Power Mesh, quoted per position and per colour.

How we produce it

1. Tech pack review and fabric confirmation
2. Lab dips or print strike-off for approval
3. Pattern making, grading and a Power Mesh-spec prototype
4. Fit sample and wearer test, then a pre-production sample
5. Bulk cutting with placement printing applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing

Typical applications

• Yoga and Pilates Studios — gloves & mittens uniforms, staff wear or resale programmes
• Universities — gloves & mittens uniforms, staff wear or resale programmes
• Railway and Transit — gloves & mittens uniforms, staff wear or resale programmes
• Ski and Snowboard Resorts — gloves & mittens uniforms, staff wear or resale programmes
• Outdoor and Hiking — gloves & mittens uniforms, staff wear or resale programmes

Quality control

Every bulk order is checked against the approved sample for shade, hand feel, measurements and workmanship. We record shrinkage, colour fastness and seam strength on the first bulk lot and hold the data as the reference for reorders, so gloves & mittens batches stay comparable over time. Inspection photos and the measurement report are sent before the balance payment is due.

FAQ

Do you provide compliance documents?

We can arrange OEKO-TEX, GOTS, BSCI, WRAP and ISO documentation as well as third-party testing reports for ISO 9001, and we support REACH, CPSIA and Prop 65 declarations for the relevant markets.

How long does sampling take?

A first prototype is typically ready in 7 working days after the tech pack is confirmed, including fabric sourcing if the base cloth is not in our stock library. Revisions add about 5 days each.

What is the minimum order quantity?

Standard programmes start at 100 pieces per style and colour. We can split sizes across a size set, and for first orders we often accept a mixed-colour run to help you test the market.

Can you match a specific colour?

Yes. Send us a Pantone TCX reference or a physical swatch. We return lab dips for approval and hold bulk shade within the agreed tolerance band before cutting.

Start your gloves & mittens programme

Share a reference photo or a sample garment and we will reverse-engineer the specification for your own label.