Custom Hang Tag — Coated Card with Anti-Rust Treatment
We supply hang tag to garment factories and brands, built in Coated Card with anti-rust treatment for uniform and corporate programmes. On a trim like this the specification that decides the outcome is board weight and stiffness, which decide how it hangs on the rack, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 2000 pieces per style per finish.
The failures here are predictable: a supplier who disappears once the deposit is paid, or shade variation within one carton. We lock material, finish, dimension and tolerance before bulk, and prepare UKCA and REACH documentation so the shipment clears instead of sitting at port while your selling season passes.
Specification
| Product | Hang Tag |
|---|---|
| Size | 70 x 140 mm |
| Finishing | gloss lamination |
| Base material | Coated Card |
| Finish / process | Anti-Rust Treatment |
| Colour options | 6 Pantone-matched shades |
| Packing | reel packed |
| MOQ | 2000 pieces per style per finish |
| Sampling | 14 working days, 3 days per revision |
| Bulk lead time | 20-40 days after approval |
| Compliance | UKCA and REACH documentation; REACH nickel-release test for metal findings |
| Ship to | Felixstowe (the United Kingdom) |
What buyers can customise
- Die-Casting — available on Coated Card, quoted per position and per colour.
- Injection Moulding — available on Coated Card, quoted per position and per colour.
- Digital Printing — available on Coated Card, quoted per position and per colour.
- Heat Transfer Printing — available on Coated Card, quoted per position and per colour.
- Rubber Coating — available on Coated Card, quoted per position and per colour.
- Offset Printing — available on Coated Card, quoted per position and per colour.
- Screen Printing — available on Coated Card, quoted per position and per colour.
How we produce it
- Drawing or reference sample review, with size and finish confirmed
- Material selection and a finish sample or strike-off
- Prototype made to the agreed size
- Fit and wash test on the actual garment fabric, then a pre-production sample
- Bulk run with anti-rust treatment applied under controlled settings
- In-line inspection, final AQL 2.5 inspection and packing to your ratio
Where it is used
- Denim and workwear — hard-wearing finishes that survive industrial washing
- Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
- Childrenswear and schoolwear — tested to the destination's safety standard
- Bridal and eveningwear — small runs with hand-finished detail
- Uniform and corporate programmes — repeatable spec held on file for reorders
Packing, testing and delivery
Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for REACH nickel-release test for metal findings are prepared for the destination market. We ship to Felixstowe with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same board weight and stiffness.
FAQ
What is the minimum order?
Programmes start at 2000 pieces per style per finish. Mixed sizes are fine within one style.
How long does sampling take?
A first sample takes 14 working days, and each revision about 3 days.
Do you ship to our forwarder?
Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
Start your hang tag programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
