Custom Hang Tag in Coated Card with Soft Enamel Fill for Outerwear and Jacket Programmes

Custom Hang Tag — Coated Card with Soft Enamel Fill

We supply hang tag to garment factories and brands, built in Coated Card with soft enamel fill for outerwear and jacket programmes. On a trim like this the specification that decides the outcome is board weight and stiffness, which decide how it hangs on the rack, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 1000 pieces per style per finish.

The failures here are predictable: a supplier who disappears once the deposit is paid, or packing that arrives mixed and unusable on the line. We lock material, finish, dimension and tolerance before bulk, and prepare SNI or SIRIM documentation per destination so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• Sewn Edge — available on Coated Card, quoted per position and per colour.
• Offset Printing — available on Coated Card, quoted per position and per colour.
• Overlocked Edge — available on Coated Card, quoted per position and per colour.
• Rubber Coating — available on Coated Card, quoted per position and per colour.
• Sequin Stitching — available on Coated Card, quoted per position and per colour.
• Dye-Sublimation Printing — available on Coated Card, quoted per position and per colour.
• Stamping — available on Coated Card, quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed size
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with soft enamel fill applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for CPSIA lead and phthalate testing are prepared for the destination market. We ship to Jakarta or Port Klang with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same board weight and stiffness.

FAQ

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

What is the minimum order?

Programmes start at 1000 pieces per style per finish. Mixed sizes are fine within one style.

Do you ship to our forwarder?

Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.

How long does sampling take?

A first sample takes 7 working days, and each revision about 5 days.

Start your hang tag programme

Tell us the quantity, the target price and the delivery window — we will tell you what is realistic before you commit.