Custom Hang Tag — Felt with Laser Engraving
We supply hang tag to garment factories and brands, built in Felt with laser engraving for outerwear and jacket programmes. On a trim like this the specification that decides the outcome is string and fastener strength, because a torn tag means no barcode, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 5000 pieces per style per finish.
The failures here are predictable: unclear responsibility when a defect shows up after washing, or a finish that tarnishes or rubs off after washing. We lock material, finish, dimension and tolerance before bulk, and prepare UKCA and REACH documentation so the shipment clears instead of sitting at port while your selling season passes.
Specification
| Product | Hang Tag |
|---|---|
| Size | 50 x 90 mm |
| Finishing | matte lamination |
| Base material | Felt |
| Finish / process | Laser Engraving |
| Colour options | 8 Pantone-matched shades |
| Packing | carded |
| MOQ | 5000 pieces per style per finish |
| Sampling | 12 working days, 5 days per revision |
| Bulk lead time | 20-50 days after approval |
| Compliance | UKCA and REACH documentation; OEKO-TEX Standard 100 for dyes and trims |
| Ship to | Felixstowe (the United Kingdom) |
What buyers can customise
- Hard Enamel Fill — available on Felt, quoted per position and per colour.
- Fringe Finish — available on Felt, quoted per position and per colour.
- Sewn Edge — available on Felt, quoted per position and per colour.
- UV Printing — available on Felt, quoted per position and per colour.
- Epoxy Dome — available on Felt, quoted per position and per colour.
- Paint Spray — available on Felt, quoted per position and per colour.
- Soft Enamel Fill — available on Felt, quoted per position and per colour.
How we produce it
- Drawing or reference sample review, with size and finish confirmed
- Material selection and a finish sample or strike-off
- Prototype made to the agreed size
- Fit and wash test on the actual garment fabric, then a pre-production sample
- Bulk run with laser engraving applied under controlled settings
- In-line inspection, final AQL 2.5 inspection and packing to your ratio
Where it is used
- Denim and workwear — hard-wearing finishes that survive industrial washing
- Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
- Childrenswear and schoolwear — tested to the destination's safety standard
- Bridal and eveningwear — small runs with hand-finished detail
- Uniform and corporate programmes — repeatable spec held on file for reorders
Packing, testing and delivery
Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for OEKO-TEX Standard 100 for dyes and trims are prepared for the destination market. We ship to Felixstowe with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same string and fastener strength.
FAQ
What packing options are available?
Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.
What is the minimum order?
Programmes start at 5000 pieces per style per finish. Mixed sizes are fine within one style.
How long does sampling take?
A first sample takes 12 working days, and each revision about 5 days.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
Start your hang tag programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
