Custom Hang Tag in Coconut Shell with Heat Transfer Printing for Outerwear and Jacket Programmes

Custom Hang Tag — Coconut Shell with Heat Transfer Printing

We supply hang tag to garment factories and brands, built in Coconut Shell with heat transfer printing for denim and workwear programmes. On a trim like this the specification that decides the outcome is string and fastener strength, because a torn tag means no barcode, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 1000 pieces per style per finish.

The failures here are predictable: minimum order quantities far above what a growing brand can absorb, or shade variation within one carton. We lock material, finish, dimension and tolerance before bulk, and prepare UKCA and REACH documentation so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• Overlocked Edge — available on Coconut Shell, quoted per position and per colour.
• Rubber Coating — available on Coconut Shell, quoted per position and per colour.
• Laser Engraving — available on Coconut Shell, quoted per position and per colour.
• Pantone Colour Matching — available on Coconut Shell, quoted per position and per colour.
• Rhinestone Setting — available on Coconut Shell, quoted per position and per colour.
• Powder Coating — available on Coconut Shell, quoted per position and per colour.
• Injection Moulding — available on Coconut Shell, quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed size
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with heat transfer printing applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for CPSIA lead and phthalate testing are prepared for the destination market. We ship to Felixstowe with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same string and fastener strength.

FAQ

How long does sampling take?

A first sample takes 14 working days, and each revision about 5 days.

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

What is the minimum order?

Programmes start at 1000 pieces per style per finish. Mixed sizes are fine within one style.

Start your hang tag programme

If you already have a supplier, send us the last problem you had with them. That is usually where we start.