Custom Hang Tag — Shell with Dye-Sublimation Printing
We supply hang tag to garment factories and brands, built in Shell with dye-sublimation printing for bridal and eveningwear studios. On a trim like this the specification that decides the outcome is string and fastener strength, because a torn tag means no barcode, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 500 pieces per style per finish.
The failures here are predictable: a finish that tarnishes or rubs off after washing, or inconsistent sizing between production runs. We lock material, finish, dimension and tolerance before bulk, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the shipment clears instead of sitting at port while your selling season passes.
Specification
| Product | Hang Tag |
|---|---|
| Size | 40 x 60 mm |
| Finishing | gloss lamination |
| Base material | Shell |
| Finish / process | Dye-Sublimation Printing |
| Colour options | 12 Pantone-matched shades |
| Packing | carded |
| MOQ | 500 pieces per style per finish |
| Sampling | 14 working days, 4 days per revision |
| Bulk lead time | 25-30 days after approval |
| Compliance | GB 18401 safety classification with GB/T 29862 fibre labelling; EN 71 part 3 for decorative components |
| Ship to | Shanghai or Shenzhen (Mainland China) |
What buyers can customise
- Laser Engraving — available on Shell, quoted per position and per colour.
- Powder Coating — available on Shell, quoted per position and per colour.
- Sewn Edge — available on Shell, quoted per position and per colour.
- Dye-Sublimation Printing — available on Shell, quoted per position and per colour.
- Heat Transfer Printing — available on Shell, quoted per position and per colour.
- Soft Enamel Fill — available on Shell, quoted per position and per colour.
- Screen Printing — available on Shell, quoted per position and per colour.
How we produce it
- Drawing or reference sample review, with size and finish confirmed
- Material selection and a finish sample or strike-off
- Prototype made to the agreed size
- Fit and wash test on the actual garment fabric, then a pre-production sample
- Bulk run with dye-sublimation printing applied under controlled settings
- In-line inspection, final AQL 2.5 inspection and packing to your ratio
Where it is used
- Denim and workwear — hard-wearing finishes that survive industrial washing
- Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
- Childrenswear and schoolwear — tested to the destination's safety standard
- Bridal and eveningwear — small runs with hand-finished detail
- Uniform and corporate programmes — repeatable spec held on file for reorders
Packing, testing and delivery
Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for EN 71 part 3 for decorative components are prepared for the destination market. We ship to Shanghai or Shenzhen with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same string and fastener strength.
FAQ
What is the minimum order?
Programmes start at 500 pieces per style per finish. Mixed sizes are fine within one style.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
What packing options are available?
Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.
How long does sampling take?
A first sample takes 14 working days, and each revision about 4 days.
Start your hang tag programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
